clutch cable problems
#1
clutch cable problems
my cable keeps falling off the quadrant. and if i tighten the hell out of it the clutch engages so high almost even with the brake pedal
here is how my clutch cable is routed
http://s225.photobucket.com/albums/d...ablevideo1.flv
is there suppose to be play in the first inch of the pedal
here is how my clutch cable is routed
http://s225.photobucket.com/albums/d...ablevideo1.flv
is there suppose to be play in the first inch of the pedal
#2
http://s225.photobucket.com/albums/d...ablevideo2.flv
watch how my fire wall adjuster goes back in when i try to unscrew it.
whats going on?
thanks
watch how my fire wall adjuster goes back in when i try to unscrew it.
whats going on?
thanks
#5
i'll go get a pic. 5 min
#10
I have a Steeda and had issue with it when I crammed it on. Took the quadrant back off and seen a pin that needed to be removed and cable run under then replace pin. Needed some washers to take up side to side slop also. Darn thing did not come with pictures. Almost got me. I adjusted my cable at transmission first leaving 1.75 inch at firewall adjuster. Stare at it real good and this mudpuddle will clear up.