Dash Removal
Dash Removal
10-18-2009, 02:42 PM
#2
5th Gear Member
Join Date: Apr 2006
Location: NC
Posts: 2,166
Start by removing the console, glovebox, radio, and steering coulumn covers and knee bolster. Then the upper dash vent (defroster) and the speaker grilles. Then you can take out the speedo cluster. From there just follow the edge of the dash looking for screws and bolts.
Last edited by Boss_Hotrod; 10-18-2009 at 03:09 PM.
10-18-2009, 05:58 PM
#3
The Rogue Mod
Join Date: Feb 2006
Location: Maryland Sucka's!!
Posts: 21,918
Follow the steps for the heater core removal. Pretty much the same thing
http://www.mustangmonthly.com/howto/5652/index.html
http://www.mustangmonthly.com/howto/5652/index.html
10-19-2009, 02:25 AM
#4
5th Gear Member
Join Date: Jul 2003
Location: United States
Posts: 3,451
I prefer taking the dash off without the metal bracket that it bolts to. I think taking off the metal bracket with it makes it a lot harder due to the wires/steering column. I just follows the dash looking for screws holding it into the metal.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM
