Stud Mount Conversion Kits
#33
i have the springs that came with my cam but they are on another set of heads, the stock heads that i worked over before i decided that i needed new heads. can they be taken off and installed onto my trickflow heads with the heads still on the car?
#34
Is it possible, yes (using compressed air, or a piece of rope pushed into the spark plug hole. Is it the correct way to do it, no. Depending on the springs, the spring seats may need to be machined/shimmed, and once installed, install height, coil bind, seat pressure, open height, open pressure ect... needs to be verified for each valve. Others may disagree?
#35
Is it possible, yes (using compressed air, or a piece of rope pushed into the spark plug hole. Is it the correct way to do it, no. Depending on the springs, the spring seats may need to be machined/shimmed, and once installed, install height, coil bind, seat pressure, open height, open pressure ect... needs to be verified for each valve. Others may disagree?
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM