daniel93gt

Does anyone know if the 3:73 ring gear and traction lock setup in my 93 mustang 8.8 will work in my 88 f-150 8.8?

wildstang87

no it wont, the mustangs use 28splined axles, the F150s use 31splines.

Quik

hte gears will work

daniel93gt

Could i buy a spool or a traction lock for truck axles? Where would I get one?

wildstang87

the ring and pinion will work, but you would have to get a 31 spline carrier. you can get them anywhere that sells limited slips. eaton, auburn, detroit, are just a few that sell the 31s. look at summit or jegs. summit sells the eaton for $489.

cammedlx

I would get a mini spoolIf you can live with the agravation of poor low speed turing,and the chirping of the tires.

daniel93gt

Thanks for the help guys. I think I will definitly go with limited slip truck tires are to expensive to run a spool.

wildstang87

the mini spool isnt that bad, but it will wear the rear tires a good bit quicker, but makes for a hell of a burnout.