5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
Sponsored by Weld Racing
Welcome to Mustang Forums!
Welcome to Mustang Forums.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
hello, i have a 94 mustang gt 5speed manual transmission. recently i just replaced the rear transmission seal, and put fluid in the trans. the trans was pretty dry when i replaced the seal. would i need to take tranny out to get fluid into the torque converter? because now when i ease off the clutch (from a stop) in first gear my whole car shakes really bad. its never done this before. and it also does it when i shift into 2nd and sometimes i can feel it alittle in 3rd gear. if you have any info for me please help..
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
project, i was just told by a buddy that i had one lol. i am not a mech at all just know a little here and there. but i replaced the seal were the drive shaft and tranny meet. i pulled the drive shaft off and then pried off the old seal, which has that rubber cone looking peice on it. put knew seal back on. then i added 2qts of fluid. which i know i need a little bit more, because i can barely feel the fluid in the tranny as it is. but like i said before it was pretty low when i got to replacing the old seal.
interesting, shows how much i know about manual transmission, from what i quickly looked up there should be a plug on the transmission that when opened transmission fluid should come out if over filled. if this is the case then i would open plug, fill tranny till fluid comes out of plug, close plug and call it a day.
This forum is owned and operated by Internet Brands, Inc., a Delaware
corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford
Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor