newer issues.
11-15-2011, 10:03 AM
#1
Thread Starter
Join Date: Sep 2011
Location: CT
Posts: 25
newer issues.
Got an 87 GT. Just threw my flexplate in a month ago and barely drove the car. The other day I noticed when put into OD, it shifted into third really early. I purchased the Lokar TV cable. Any proper way to set up brackets and adjust cable?
Also, i have a hurst shifter. Was wondering if shifting from 1-OD is terrible for my transmission.
If so, anything hard with installing a manual valvebody?
Im pretty decent hands on, so anything isn't an issue.
Also, i have a hurst shifter. Was wondering if shifting from 1-OD is terrible for my transmission.
If so, anything hard with installing a manual valvebody?
Im pretty decent hands on, so anything isn't an issue.
11-15-2011, 09:44 PM
#2
M.A.D. Motorsports
Join Date: Jul 2006
Location: Indiana
Posts: 8,014
What was wrong with your stock TV cable?
If you purchase a manual VB then no, its pretty easy....drain the fluid, drop the pan, unbolt the stock VB, bolt in the new one, install the pan, fill and have fun.
When did it actually shift into 3rd? (speed, RPM,.....)
If you purchase a manual VB then no, its pretty easy....drain the fluid, drop the pan, unbolt the stock VB, bolt in the new one, install the pan, fill and have fun.
When did it actually shift into 3rd? (speed, RPM,.....)
11-18-2011, 05:18 PM
#3
Thread Starter
Join Date: Sep 2011
Location: CT
Posts: 25
Guy before me had an OEM lokar. But he screwed up the brackets, so i had to throw in another.
itll usually ****** 3rd around.. 20. Almost instantly after second. Speedo doesn't work so hard to tell.
Might have a bad VB. How much does a MVB run? Few hundred?
itll usually ****** 3rd around.. 20. Almost instantly after second. Speedo doesn't work so hard to tell.
Might have a bad VB. How much does a MVB run? Few hundred?
Thread
Thread Starter
Forum
Replies
Last Post
lincolnshibuya
V6 (1994-2004) Mustangs
9
12-08-2015 04:37 PM
mungodrums
S550 2015-2023 Mustang
7
09-29-2015 09:18 PM
