When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
I do I post a pic? I've got a pic of the valve stem with the mark, but I can't seem to post it. I've got it up on my album, and entered the url into the picture link, but nothing goes up.
Here's a picture of the valve stem using the stock push rods.
what heads and cam do you have?? witness mark looks a little wide, try going down .050 and up .050 and compare witness marks, I assume you are using a solid mock up lifter??
Comp Cams will sell you any length pushrod you need, I think they are 'off the shelf' in .025 increments....
I think Summit has the push-rods also that are probably good enough if you are using a hydraulic roller cam.......