5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
Sponsored by Weld Racing
Welcome to Mustang Forums!
Welcome to Mustang Forums.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
i bought a comp cam(xe270hr) and twisted wedge heads. the cam says to use 1.7 rockers, but i talked to the guys from comp and they said go with the 1.6. just wondering why they would make that recommendation, they didnt give me much of an explanation as to why. And also for you guys that are running the twisted wedge heads what size pushrods are you running, trick flows top end kit comes with the 6.70's. Im going to measure just to make sure i have the right size but just wanted to see what everybody had to go with. thanks for the help guys/girls.
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
you must measure, no ifs or guesses, what one uses may not be what another has to use....and check the came card and see if numbers listed are for 1.7's if they are and you use 1.6's then lift specs will be lower..ect ect
Originally Posted by dudegirl
Be polite and cordial when you talk to them, as pissing off the guys that can help you is seldom a good idea.
This forum is owned and operated by Internet Brands, Inc., a Delaware
corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford
Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor