mjr46

make sure that it's not the plug arcing due to cracked porcelien, usually on the white part you'll see a fine line of carbon tracking when cracked

malo012000

not the plug the wire was

mjr46

you said this^^^^^^^^ water will make the spark arc onto and off anything, inspect plug and wire for any burn spots

malo012000

ok I have already ordered new ones and will install tomorrow .Do you think this will stop my miss and tac issues

mjr46

only if that is the cause, for load sensitive misfires, normally, I use a portable lab scope to ID the prob cylinder, but I know you don't have such option so all you can do is slap a part and cross your fingers

malo012000

Put new plug wires in today and eveythings good now.......THANKS!!!!