Want to install cutoff switch for fuel pump
#11
Relay is under the drivers seat.
Tan/light green is the ground, red/black is incoming inertia switch signal, orange/light blue is 12v constant, pink/black is out to pcm/pump
Take your pick. Adding a switch on any of those wires will interrupt the pump.
Tan/light green is the ground, red/black is incoming inertia switch signal, orange/light blue is 12v constant, pink/black is out to pcm/pump
Take your pick. Adding a switch on any of those wires will interrupt the pump.
Last edited by mattdel; 06-02-2012 at 12:01 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Design1795
Motor Swap Section
1
01-24-2017 10:38 PM
Design1795
New Member Area
6
08-24-2015 04:41 PM