4.10 gears with AOD Speedo Cal? - MustangForums.com



5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
Sponsored by:
Sponsored by:

Reply
 
 
 
Thread Tools Search this Thread
Old 10-05-2005, 05:58 PM   #1
inahury1
1st Gear Member
Thread Starter
 
Join Date: Aug 2004
Location:
Posts: 74
Default 4.10 gears with AOD Speedo Cal?

I am putting 4.10 gears in My 93 5.0 with AOD and from what I read I can't get a speedo gear to correct the speed. Is this coorect or am I missing something. If I install the 23 tooth how far aprox. will the speedo be off.
inahury1 is offline   Reply With Quote
Old 10-05-2005, 08:14 PM   #2
Quik
6th Gear Member
 
Join Date: Nov 2003
Location: Pittsburgh, PA
Posts: 5,182
Default RE: 4.10 gears with AOD Speedo Cal?

i have had no issues getting correct speedo gear. for my car is a white gear. and LMM has them
Quik is offline   Reply With Quote
Old 10-05-2005, 08:27 PM   #3
89stanglx
3rd Gear Member
 
Join Date: Nov 2004
Location:
Posts: 537
Default RE: 4.10 gears with AOD Speedo Cal?

my speedo gear is black but it still is a 23 tooth, i cant remember where i got mine. Summit,or ford racing mine indicates about 5 mph faster that im going at around 60 but im sure its my tires they are slightly shorter that factory size.
89stanglx is offline   Reply With Quote
Old 10-06-2005, 12:40 AM   #4
Mustang5.0_GT
3rd Gear Member
 
Join Date: Feb 2005
Location:
Posts: 522
Default RE: 4.10 gears with AOD Speedo Cal?

Where does the speedo go ?
Mustang5.0_GT is offline   Reply With Quote
Old 10-07-2005, 01:19 AM   #5
inahury1
1st Gear Member
Thread Starter
 
Join Date: Aug 2004
Location:
Posts: 74
Default RE: 4.10 gears with AOD Speedo Cal?

Thanks, I will get the white gear ordered and try it out!
inahury1 is offline   Reply With Quote
Old 10-07-2005, 01:48 PM   #6
nitrous_bob
6th Gear Member
 
nitrous_bob's Avatar
 
Join Date: Oct 2005
Location: st clair shores MI
Posts: 6,028
Default RE: 4.10 gears with AOD Speedo Cal?

YOU CANNOT correct an aod w/ 4.10's by driven gear change alone. it would take a 26 tooth gear which would never work for about 10 miles maybe, if it even existed

you have to replace the drive gear which is machined on the output shaft, so you need the entire output shaft, and disassemble the trans to do it...you can get to about 15% off thats it.

an aod is 8 tooth drive , and you would need a 6t drive w/ a 19 t driven or 7t w/ a 23 t driven (but they aren't any good)

both aod's i had had 21t driven and were purple.....w/ 3.27's

here is the part numbers for them, the 23 tooth are for t-5's and will work for about 15-20 k b4 thrashing
you can also get a calibration box installed...but i think it's big $$$$$$


Auto Trans. Driven Gears
(17271)

Number of Teeth / Color / Service Part Number

16
Blue
D0AZ-A

17
Green
C7SZ-A

18
Gray
C7SZ-B

19
Tan
C7VY-A

20
Orange
C8SZ-B

21
Purple
D0OZ-B

nitrous_bob is offline   Reply With Quote
Old 10-07-2005, 03:53 PM   #7
vfast
I ♥ Acer
 
Join Date: Jul 2003
Location:
Posts: 11,394
Default RE: 4.10 gears with AOD Speedo Cal?

so true.now with a tire change it could get very close
vfast is offline   Reply With Quote
Old 10-08-2005, 12:50 AM   #8
inahury1
1st Gear Member
Thread Starter
 
Join Date: Aug 2004
Location:
Posts: 74
Default RE: 4.10 gears with AOD Speedo Cal?

Well You got Me thiking, Me wife drives the car once and a while and it would drive her crazy, therfore makig My life more difficult if you know what I mean. What about the 3.73 with the 23 tooth would this combo be in the ball park?

Thanks for all the info,
Preston
inahury1 is offline   Reply With Quote
Old 10-08-2005, 11:14 AM   #9
nitrous_bob
6th Gear Member
 
nitrous_bob's Avatar
 
Join Date: Oct 2005
Location: st clair shores MI
Posts: 6,028
Default RE: 4.10 gears with AOD Speedo Cal?

should be w/in 5-8% (which is still noticably irritating)
nitrous_bob is offline   Reply With Quote
Old 10-09-2005, 05:34 PM   #10
inahury1
1st Gear Member
Thread Starter
 
Join Date: Aug 2004
Location:
Posts: 74
Default RE: 4.10 gears with AOD Speedo Cal?

OK really confused Know I pulled the driven gear out and it is a 19 tooth and the car has 3.27 gears does this mean I have a 7 tooth drive gear in the tranny?
inahury1 is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Possible Clutch Issues..? Thunderball 4.6L (1996-2004 Modular) Mustang 15 11-22-2015 11:49 PM
Terminated Whipple GT battles '13 GT500 on E85 Bokeo Street/Strip 6 10-10-2015 08:28 PM
What other parts should I be concerned about if my pinion bearing went bad? KingRando 2005-2014 Mustangs 5 10-02-2015 08:06 AM
So who wins uedlose The Racers Bench 4 10-01-2015 08:31 PM
Centerforce Clutch, will a exedy flywheel work? junior04 4.6L (1996-2004 Modular) Mustang 1 09-28-2015 10:53 AM


Tags
410, aod, decode, e9dp7006, ford, gear, gears, mustang, rfe9dp, rfe9dp7006aa, speedo, speedocal, transmission, v6, v8

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -5. The time now is 02:30 AM.