MustangForums.com

5.0L (1979-1995) Mustang Technical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.

pulled oil pan, found this..

Thread Tools
 
Search this Thread
 
Old 07-27-2013, 08:30 PM
  #1  
Goosepoop302
4th Gear Member
Thread Starter
 
Goosepoop302's Avatar
 
Join Date: Apr 2006
Location:
Posts: 1,698
Default pulled oil pan, found this..
anyone ID these?
Attached Thumbnails pulled oil pan, found this..-img_20130727_202307.jpg   pulled oil pan, found this..-img_20130727_202312.jpg  
Goosepoop302 is offline  
Reply
Old 07-27-2013, 10:13 PM
  #2  
mattdel
6th Gear Member
 
mattdel's Avatar
 
Join Date: Nov 2006
Location: Spfld, MA
Posts: 9,240
Default
Be willing to bet they're internal to the oil pump.
mattdel is offline  
Reply
Old 07-27-2013, 10:37 PM
  #3  
darkmach1
4th Gear Member
 
darkmach1's Avatar
 
Join Date: Feb 2008
Location:
Posts: 1,799
Default
Im going with oil filter pressure bypass valve. What oil filter do you use OP?
darkmach1 is offline  
Reply
Old 07-27-2013, 11:12 PM
  #4  
Goosepoop302
4th Gear Member
Thread Starter
 
Goosepoop302's Avatar
 
Join Date: Apr 2006
Location:
Posts: 1,698
Default
Im hoping they are internal to the pump...would be an easy find and fix with a new pump. I hate to say I think its a fram ><
Goosepoop302 is offline  
Reply
Old 07-27-2013, 11:13 PM
  #5  
Goosepoop302
4th Gear Member
Thread Starter
 
Goosepoop302's Avatar
 
Join Date: Apr 2006
Location:
Posts: 1,698
Default
if you see my thread about the distributer gear it may explain more possible causes... I had a oil pump seize and snap the shaft to the distributer.
Goosepoop302 is offline  
Reply
Old 07-28-2013, 11:40 AM
  #6  
mjr46
D.R. THE PATHETIC DORK
 
mjr46's Avatar
 
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
Default
check the pump / pull it, replace it as well as get a good filter, fl1-a is all I use
mjr46 is offline  
Reply
Old 07-28-2013, 11:54 AM
  #7  
Goosepoop302
4th Gear Member
Thread Starter
 
Goosepoop302's Avatar
 
Join Date: Apr 2006
Location:
Posts: 1,698
Default
pump is being replaced. a small wire from the top of a lifter infiltrated t oil pump screen, jammed the pump, snapped the rod to the dizzy and shut down the car.

I am replacing the pump, oil pickup (afraid some pieces remain in it) oil shaft and maybe the distributer as well.
Attached Thumbnails pulled oil pan, found this..-img_20130727_195042.jpg   pulled oil pan, found this..-img_20130727_195109.jpg  
Last edited by Goosepoop302; 07-28-2013 at 11:57 AM.
Goosepoop302 is offline  
Reply
Old 07-28-2013, 05:55 PM
  #8  
mjr46
D.R. THE PATHETIC DORK
 
mjr46's Avatar
 
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
Default
replace your lifters as well if one broke, more may in the future
mjr46 is offline  
Reply
Old 07-28-2013, 08:36 PM
  #9  
Duncan_GT
4th Gear Member
 
Duncan_GT's Avatar
 
Join Date: Jun 2011
Location: Indy
Posts: 1,353
Default
At least you broke the roll pin in the distributor and shut it down vs seizing the pump and spinning rod/main bearings. You got the lesser of two evils lol
Last edited by Duncan_GT; 07-29-2013 at 10:06 AM.
Duncan_GT is offline  
Reply
Old 07-28-2013, 10:43 PM
  #10  
Goosepoop302
4th Gear Member
Thread Starter
 
Goosepoop302's Avatar
 
Join Date: Apr 2006
Location:
Posts: 1,698
Default
Well the oil pump sending units rod snapped.. What rod and bearings are you referring to
Goosepoop302 is offline  
Reply



Advanced Search
Quick Reply: pulled oil pan, found this..


Reply Closed Thread Share
Forum Jump

All times are GMT -5. The time now is 11:48 PM.