taff

I am in the process of installing a switch panel on my 95 GT and needing some help. I have a 4 switch panel with main power and start button I want to completely remove the key. I have water pump, fan, and fuel pump wired up but need to know which wires from ignition switch to splice for main power and start button. I have my ignition switch removed from under steering column but don't which switch they need go. On my 95 I have 5 yellow 1 tan/white 2 grey/y 1 big black 1 small black 1 black/white and 1 purple coming from the ignition. Which wires do I need to tie together to run I will just run wire directly from starter relay or maybe start to solenoid from push button but its the other ones I not sure about. I know one goes to EEC do the rest run Accessories? Any help would be greatly helpful so thanks in advance.

taff

Nobody knows which wires from the ignition switch need constant power to run the car.

dawson1112

Im fairly certain there is only one constant 12v at the ignition switch. The yellow wire.

The rest only get power when in the run position.

Bubba 95SN

Lock-unlock steering column will be by what means?