5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
Sponsored by Weld Racing
Welcome to Mustang Forums!
Welcome to Mustang Forums.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Okay guys and gals.. I have a 91 5.0 with Edelbrock Performer RPM heads and Pro Comp intake.. I need to know the best gaskets to use. I'm not sure if stock gaskets will work or not. I honestly don't see the problem with using stock, but I figured I would ask first. Thanks in advance. If you could also tell me why I should go with the option you suggest (just because I want/need to learn).. stock bore
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
Okay. I have a question on pushrod length.. I have an x303 cam, P2482F-STD probe pistons, and stock roller lifters, and using the RPM Performers.. So, what length should I be using? I know the stock length is 6.25 or something along those lines..
This forum is owned and operated by Internet Brands, Inc., a Delaware
corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford
Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor