I have an 87 mustang gt roller that that i purchased a while back. After dropping in the motor and trans i stared having electrical issues. I have resolved everything that i was concerned about except one very important thing... my turn signals!! I have replaced both flashers and torn apart the dash in hopes of tracking down the problem and i believe i have found it. This connector is not attached to anything and i believe this is where my problem lies. Can anyone tell me where or what this should be plugged into or correct me if i'm wrong and this is not my problem. thanks
Sorry, I'm not familiar with that connection, but you could pull your mult-switch, (directional lever) and see if there's a place to plug that in. If you follow those wires, do they lead up to the steering column or come from the dash harness?
Last edited by 88 orangepeel notch; 01-29-2014 at 06:49 AM.
This forum is owned and operated by Internet Brands, Inc., a Delaware
corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford
Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor