5.0sicness

Hey guys so I just replaced the tfi control module as it went out on me last week, with an accel high performance tfi I also put a msd cap and rotor on now it fires up and runs great except now I have this random miss I could go a day with out it missing or sometimes it will miss two or three times on my 15 min drive to work. Any ideas why? Is there something I could have missed or messed up when changing these parts. I did mark the distributor and made sure it went back where it was when doing the fti control module. Please any help would be greatly appreciated

5.0sicness

Anyone? Please this is driving me nuts and it's embarrassing to to drive...

mjr46

check plugs and wires for arcing, mist with a spray bottle and look for arcing

5.0sicness

I've tried that no visible arc, it's not like a normal miss as if I had a split boot or worn wire. It could run all day and not do it but then all the sudden out of nowhere it will drop out and come back like the engine died for a split second... Rather violent, Thank you for replying I really appreciate it.

mjr46

replace the pip/stator in the distributor

88 orangepeel notch

You said you marked dizzy when you pulled it, and got it close on install, but have you checked with a light yet?

EDIT: Never mind this post, reread your third post and I jumped the gun.

5.0sicness

Ok I'll try the stator next thanks everyone for taking time to help me out..