5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
Sponsored by Weld Racing
Welcome to Mustang Forums!
Welcome to Mustang Forums.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
Got the transmission out and I went and removed the steel bearing retainer on the end of the transmission and the outer ring of a bearing was in the retainer and the inner part was around the tranny input shaft.
Is this bearing broken?? B/c i can just slide the outer ring back on, but if this bearing is bad Id like to know before reassembling. Also, it appeared that there was sealant behind the retainer, but I've never heard anyone putting sealant for the retainer.
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
Mac CAI, 65mm Cobra TB, Explorer Intake, BBK Shortys, BBK X-pipe, Magnaflow catback, FRPP Aluminum Driveshaft, MM Steering Shaft, UD pullies.
This forum is owned and operated by Internet Brands, Inc., a Delaware
corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford
Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor