5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
Sponsored by Weld Racing
Welcome to Mustang Forums!
Welcome to Mustang Forums.
You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
My 1992 coupe was vandalized a couple weeks ago. It would appear that some kids stomped on the roof and hood. I had an estimate performed at a reputable shop here in Houston and they quoted me $4,300 for labor alone. They only included labor because I was told they could not find the parts I need (new roof and hood). Do I have any recourse here? Is the junkyard my only option for parts?
I should note that I popped the roof out from inside the car upon discovering the damage. In retrospect this may not have been a good idea.
This ad is not displayed to registered or logged-in members. Register your free account today and become a member on Mustang Forums!
There are reproduction hoods as well as numerous fiberglass options. The roof on the other hand is a different story. Nobody repops a skin for it so youll have to either fix the one on the car or find a donor.
pop headliner down and see if you can pop the roof back up from underside
Originally Posted by EUTARD
Suggest having a conversation with the highly INEXPERIENCED clowns....D.R the Dork, THE BarnyYard smells like......again and finally staring the highly intelligent and I must say skilled Eutard! UH where did de' go George
That sucks in a way that even cursing can't describe.
Personally, since your car is a desirable notch for drag racers, I'd take the insurance check (I sure hope you had full coverage), sell the car off to a racer, and buy another one.
If that's not an option then the most realistic thing to do is beat it as "flat" as you can with a body hammer and dolly, fill it, spray it, and hope for the best. The roof steel on Fox cars is so thin that you're basically asking for a miracle if you expect that approach to work. Even if you had access to another notch roof the replacement cost would vastly exceed the value of the car.
Or plan C, F the body damage and turn it into the most hostile drag car on the planet. Ugly and fast wins. If to looks like s$%t then you wont mind beating on it like it stole your bike in 3rd grade.
I had damage such as yours on a 1993 Mustang Coupe that I bought that way.
I took it to a body shop and they welded wires to the roof and used a "Special Puller" on it and it came out SWEET! I had some other Minor Dents Fixed and the total was only about $650.00.
But, I "Re-Placed" the Fenders, Hood and Trunk Lid with used one that I bought at a pick-a-part that happened to be the same color. Nice! The Hood Cowl I spent hours on and fixed myself and it looks great and with the Plastic Vented Cowl Cover on, you cannot tell at all.
Have not had the car re-painted yet but it sure does look nice.
In short, get another estimate and look in the boneyards for the hood.
Heck, I'll sell you a hood that you can re-paint.
89 Vert. 5.0 AOD Burgandy, Black Top, Black Interior
92 Vert. 5.0 AOD White, Black Top, Black Custom Interior
92 Coupe 4 Banger (for now) T-5 White, Black Interior
93 Coupe GT 40 Crate T-5 Calypso Green, Black Interior
the roof dont look to good if it was mine I would go on a search for a roof. I do bodywork for a living and I still would find a roof skin. they are not that had to put on. It is one of the first thing people see on your car plus it is up high so you see it every time you get in the car. Just finding one may be a pain. But it could be fixed if worked out. just getting in and beating it back up is not always a good thing to do with thin metal due to it stretching so easy. The hood no big deal get a fiber glass one for it or find a used one there are lots of them out there.
Dude that sucks. Talk to a Dent removal service. They'll come to your house anddo the work. Those guys do some amazing things. They take spoon shaped devises and work the dents out. Couple of those look pretty deep but I've seen these services deal with some pretty nasty hail damage with good results. Good luck.
__________________ ENGINE363 forged dart engine. 300 shot!TRANNY C4 with trans brake, 3800 stall, 9in. raceconverter, hurst shifter REAR Moser 35 spline kit with spool, FRPP 3.73 gearsSUSPENION UPR Upper & lower control arms, Strange 10 way dampers, coilovers up front, BBK sub frame connectors, UPR Tube K-member & A-arms NEW TIMES COMING. 2015 Mustang GT premium.
This forum is owned and operated by Internet Brands, Inc., a Delaware
corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford
Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor