HOW TO REMOVE THE IAC SCREW?
#1
HOW TO REMOVE THE IAC SCREW?
95gt 5.0
How do you get the lower screw out
I got the top 1 with a 5/16th socket but can't get the socket in the lower 1 even with a swivel!!!
Am I a idiot or is there a trick to it? Everything I've read says to use a 8mm or 5/16th socket.
I have a 8mm socket but it's deep well & won't fit as there isn't very much room between the screw and a black looking pipe running on top of the valve covers. Also I noticed when I use my shorter 5/16 it won't go on because there is a curve on the IAC above the screw that seems to intrude the way!!
HELP PLEASE AS I NEED TO CLEAN THE IAC
How do you get the lower screw out
I got the top 1 with a 5/16th socket but can't get the socket in the lower 1 even with a swivel!!!
Am I a idiot or is there a trick to it? Everything I've read says to use a 8mm or 5/16th socket.
I have a 8mm socket but it's deep well & won't fit as there isn't very much room between the screw and a black looking pipe running on top of the valve covers. Also I noticed when I use my shorter 5/16 it won't go on because there is a curve on the IAC above the screw that seems to intrude the way!!
HELP PLEASE AS I NEED TO CLEAN THE IAC
#4
If your pulling it to clean it , I suggest just remove the entire throttle body so you can clean that as well. But Im pretty sure on my 94 I used an 8mm or 5/16 open end wrench , 8mm and 5/16 are the same thing so it doesn't matter. It helps to remove the air intake tube and use the shortest wrench you can find.
#5
dswson1112,
I'll try the open end wrench again and the air intake isn't in they way it's on the other side. I took some pics but don't know how to attach them on here...lol
here's a link to my pics:http://s1174.photobucket.com/user/eg...?sort=3&page=1
First 4 are what we are talking about.
I'll try the open end wrench again and the air intake isn't in they way it's on the other side. I took some pics but don't know how to attach them on here...lol
here's a link to my pics:http://s1174.photobucket.com/user/eg...?sort=3&page=1
First 4 are what we are talking about.
Thread
Thread Starter
Forum
Replies
Last Post
jwog666
Pipes, Boost & Juice
11
12-27-2021 08:09 PM
breaking
Audio/Visual Electronics
5
10-02-2015 01:27 PM