When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
5.0L (1979-1995) MustangTechnical discussions on 5.0 Liter Mustangs within. This does not include the 5.0 from the 2011 Mustang GT. That information is in the 2005-1011 section.
yeah i thought so i need to get some rocker studs to and guide plates not sure on the guide plates 3/8 flat or 5/16 raised any ideas lol i am a new ford owner so this is all foreign to me
cool thanks fgor the help lone more question lol so 3/8,s guides with the 7/16ths screw in studs with 3/8ths rod for the rockers can i use any roller rockers that take a 3/8ths stud mount
cool thanks fgor the help lone more question lol so 3/8,s guides with the 7/16ths screw in studs with 3/8ths rod for the rockers can i use any roller rockers that take a 3/8ths stud mount
I would check those heads and make sure which stud size you need, 3/8 or 7/16.
Then get the guide plates.
Borrow a rocker in the ratio you are going to use, 1.6 are stock, 1.7 were O.E. to some Cobra types.
Get an adjustable push and a set of 12" calipers and find out just what you need for a pushrod.
BTW, check the valve/piston clearance before you fire this thing up.....