Needing advice on building the 5.0
#24
you have your pm blocked also so I cant pm you. anyway when you get it figured out PM me and I will give you a price and the run down on the build and all. But I got to get some sleep. or send me your email at 2faz4u@gmail.com
#25
dart shp is 1700 for the block from ford strokers and will handle easily support 800-1000, you don't need the most expensive dart block out there with the goals you have...................or buy Johns set up................
Last edited by mjr46; 01-23-2015 at 06:59 AM.
#26
To make 500hp on a budget, I'd go with a cheap H/C/I package on the stock bottom end and a used blower kit making 10lbs.
Although... I ran 11.36 @ 122 on a stock 5.0 with a little bit of boost. This is fun too-
http://www.mustang50magazine.com/tec...ded/index.html
Although... I ran 11.36 @ 122 on a stock 5.0 with a little bit of boost. This is fun too-
http://www.mustang50magazine.com/tec...ded/index.html
Last edited by UPRSharad; 01-23-2015 at 07:23 PM.
Thread
Thread Starter
Forum
Replies
Last Post
Cannibal_carnies
Motor Swap Section
3
03-02-2023 06:17 PM
Faolan65
Arizona Regional Chapter
0
08-25-2015 09:24 AM