ECT help
#1
ECT help
I am in the process of replacing the ECT senor on my '94. I like to use OEM parts for things like this. I ended up with a Motorcraft kit form a dealer.
It looks like this:
http://www.americanmuscle.com/ford-t...nsor-8395.html
Those short connectors in the kit do not appear to fit in the original pig tail. I do not understand the instructions it came with. I even tried getting some male bullet connectors to hook the wires to the pig tail but they were too large as well. Any insight?
Thank you in advance.
It looks like this:
http://www.americanmuscle.com/ford-t...nsor-8395.html
Those short connectors in the kit do not appear to fit in the original pig tail. I do not understand the instructions it came with. I even tried getting some male bullet connectors to hook the wires to the pig tail but they were too large as well. Any insight?
Thank you in advance.
#2
the new pigtail that came with the kit needs to be spliced into your vehicles harness, this will convert it to the new style sensor(by the looks of it). its pretty straight forward, but if you dont have experience with wiring repair it might seem complicated at first glance.
#6
#7
Hey 94 - It's looking like you already got some solid help here from jwog on this! If you have any other questions at all don't hesitate to let me know and if you need tech support immediately shoot my customer service team a call and they're there to help out!
Alex
Alex
Thread
Thread Starter
Forum
Replies
Last Post
Matt's 95 Stang
5.0L (1979-1995) Mustang
2
10-05-2015 07:16 AM
Faolan65
New Member Area
2
08-27-2015 06:40 AM
Faolan65
Arizona Regional Chapter
0
08-25-2015 09:24 AM