Milky

I was getting ready to start putting on my new intake manifold, track heat, and I saw that two assemblies that were on my cobra intake manifold will not connect anywhere on the new track heat...</P>


These 2 assemblies on the back will not connect on the new manifold..</P>


And the tube connecting in the second pic has no place on the new manifold.. What are these and what do I do about installing them on the manifod, if I need to.</P>


</P>


</P>

Milky

Sorry about the huge *** pictures, I couldnt change size, please help me! lol

BLKSTANG9879

You gotta just make the pic smaller. and put a arrow or someth<IMG src=smileys/smiley1.gif border="0">ing of what your talkin about

Milky

I think I figured it out, the EGR assembly has to be put onto an adapter you buy from trick flow...

mustangdave357

Looks like you need an egr plate or an egr plate delete. The cobra intake has the egr plate built into it. The trick flow doesnt, Ihave the trick flow on a 357. I cant tell what else is wrong based on these pics.

vfast

I hope you have some good mods for the intake..I do see you have the blue tops

Milky

Ive got some mods that should use its potential. My new heads certainly will.</P>