Hawaii 93 Stang

Hey Guys. I needed to replace the fan clutch. Took off the fan and clutch, removed old clutch, cleaned up the fan, install new clutch to fan. Ready to put it back on and discovered the water pump pulley was crooked. I do know the 4 bolts to the fan holds down the pulley. Now my question is if there a way to straighten it out without taking the belt off?? Still learning here!![:@]

5.0stanger

You should take the belt off, it would be easyest.

jhall01

its not hard to take the belt off. n how is your belt staying on if the pulley is crooked. if it was just me i would go n get another pulley since you have everything off. but thats just me

5.0stanger

The reason why his pulley is crooked is because he took the bolts out of it to remove the fan.....he doesn't need a new pulley. Just needs to remove the belt so he can bolt it all back together.

jhall01

Oh i gotcha now lol. im tired leave me alone lol.

Hawaii 93 Stang

Great guys!! Thanks will do!!! That's what I was thinking too!!! Off to go fix her now!!

5.0stanger

Good luck

dimebag

i know it was a pita to get the bottom bolt or two... with the belt still on... taking the belt off makes life alot easier

stang8689

Damn that is the easiest belt to remove

dimebag

you should try one of those full size chevy vans... do a belt on one of those... i had to do an alt and a belt...yup, big pain in the ***...

im talkin the vans w. the short *** hood, and the dog box...

damn i hated workin on those, lol