4 cyl to V8 conversion
#1
4 cyl to V8 conversion
Seen some conflicting informatio on this when I tried a search.
Anyone that has done this please chime in.
4 cyl to 302 - V8 conversion.
1. Does the K-member need to be swapped out or is it the same?
2. What trans will be in a 5 speed 4cyl, if T-5 is it the same as 5.0 T-5 ?
3. Front and rear swaybars ?
Any other info you want to share would be great too.
Anyone that has done this please chime in.
4 cyl to 302 - V8 conversion.
1. Does the K-member need to be swapped out or is it the same?
2. What trans will be in a 5 speed 4cyl, if T-5 is it the same as 5.0 T-5 ?
3. Front and rear swaybars ?
Any other info you want to share would be great too.
#2
RE: 4 cyl to V8 conversion
ORIGINAL: r.barn
Seen some conflicting informatio on this when I tried a search.
Anyone that has done this please chime in.
4 cyl to 302 - V8 conversion.
1. Does the K-member need to be swapped out or is it the same?
2. What trans will be in a 5 speed 4cyl, if T-5 is it the same as 5.0 T-5 ?
3. Front and rear swaybars ?
Any other info you want to share would be great too.
Seen some conflicting informatio on this when I tried a search.
Anyone that has done this please chime in.
4 cyl to 302 - V8 conversion.
1. Does the K-member need to be swapped out or is it the same?
2. What trans will be in a 5 speed 4cyl, if T-5 is it the same as 5.0 T-5 ?
3. Front and rear swaybars ?
Any other info you want to share would be great too.
there were no rear swabars on the non v8 cars
#3
RE: 4 cyl to V8 conversion
ORIGINAL: r.barn
Seen some conflicting informatio on this when I tried a search.
Anyone that has done this please chime in.
4 cyl to 302 - V8 conversion.
1. Does the K-member need to be swapped out or is it the same?
2. What trans will be in a 5 speed 4cyl, if T-5 is it the same as 5.0 T-5 ?
3. Front and rear swaybars ?
Any other info you want to share would be great too.
Seen some conflicting informatio on this when I tried a search.
Anyone that has done this please chime in.
4 cyl to 302 - V8 conversion.
1. Does the K-member need to be swapped out or is it the same?
2. What trans will be in a 5 speed 4cyl, if T-5 is it the same as 5.0 T-5 ?
3. Front and rear swaybars ?
Any other info you want to share would be great too.
2.t-5 but a not as strong as the 5L t-5
3. front yes, rear no
#6
RE: 4 cyl to V8 conversion
ORIGINAL: r.barn
Whats involved with the wiring harness ???
Will A9L computer out of an 89 V8 work ?
Whats involved with the wiring harness ???
Will A9L computer out of an 89 V8 work ?
#7
RE: 4 cyl to V8 conversion
ORIGINAL: sleeper_inc
You need the wiring harness from the 5.0. It has more connections and the proper wiring connections where as the 2.3 has only half the connections of the V8... Swap a complete engine bay harness over
ORIGINAL: r.barn
Whats involved with the wiring harness ???
Will A9L computer out of an 89 V8 work ?
Whats involved with the wiring harness ???
Will A9L computer out of an 89 V8 work ?
Does the A9L computer plug into the 4 cyl wireharness under the dash?
#9
RE: 4 cyl to V8 conversion
ORIGINAL: r.barn
Yeah, but does the engine bay harness plug in at the firewall plugs of the 4 cyl?
Does the A9L computer plug into the 4 cyl wireharness under the dash?
ORIGINAL: sleeper_inc
You need the wiring harness from the 5.0. It has more connections and the proper wiring connections where as the 2.3 has only half the connections of the V8... Swap a complete engine bay harness over
ORIGINAL: r.barn
Whats involved with the wiring harness ???
Will A9L computer out of an 89 V8 work ?
Whats involved with the wiring harness ???
Will A9L computer out of an 89 V8 work ?
Does the A9L computer plug into the 4 cyl wireharness under the dash?
As for the computer, the harness goes through the firewall, it doesn't just connect at the fire wall, but through it and staight to the computer...
#10
RE: 4 cyl to V8 conversion
ORIGINAL: sleeper_inc
From all the information I've seen and read the 5.0 harness is just like the 2.3, just more connections for the injectors and sensors.
As for the computer, the harness goes through the firewall, it doesn't just connect at the fire wall, but through it and staight to the computer...
ORIGINAL: r.barn
Yeah, but does the engine bay harness plug in at the firewall plugs of the 4 cyl?
Does the A9L computer plug into the 4 cyl wireharness under the dash?
ORIGINAL: sleeper_inc
You need the wiring harness from the 5.0. It has more connections and the proper wiring connections where as the 2.3 has only half the connections of the V8... Swap a complete engine bay harness over
ORIGINAL: r.barn
Whats involved with the wiring harness ???
Will A9L computer out of an 89 V8 work ?
Whats involved with the wiring harness ???
Will A9L computer out of an 89 V8 work ?
Does the A9L computer plug into the 4 cyl wireharness under the dash?
As for the computer, the harness goes through the firewall, it doesn't just connect at the fire wall, but through it and staight to the computer...