rust_stang

Where did it get to? I can't find it.

PRO50SC

https://mustangforums.com/m_3255919/tm.htm

rust_stang

Ah,the link I wanted no longer works




list of what stuff weighs after its taken off
http://users.adelphia.net/~mustang-9...duction%20Top/]list of what stuff wieghs




well I'll ask it on this thread then.. how much does the front seats and rear seat in a notchback fox weigh?

w8less

thanks i noticed that a while back and tried finding it with no luck....[&:]

w8less

however i found this just now i am going to add to it

Stock 302 Shortblock with crank, rods pistons but no cam, no timing chain, no timing, no timing cover and no oil pan was 184.85 pounds.

Stock 302 Bare Block w/ Main Caps, 125.70 LBS

World Class T5 out of 85 SVO, not FULL of fluid but I think it still has some in it 71.55 LBS

Passenger Seat out of 85 SVO, cloth style, with seat track & manual lumber inflators, 44.25 LBS

SVO (might be same or similar to other 79-86 bumper reinforcement?), Steel Bumper Reinforcement, 30.70 LBS

79-90 Fender, no moldings or anything, 13.70 pounds

Front Bumper Mount Shock deals with bolts, 10.75 pounds

Steeda Drag Front Sway Bar for 79-93, has the bushing mounts but no endlinks, 13.30 pounds

Trick Flow Twisted Wedge Head fully assembled with Crane Energizer 1.6 Roller Rockers, no port work, 33.65 pounds, 30.05 pounds bare

E5 Head fully assembled with stock rockers, no port work, 53.85 pounds

Crane Energizer 1.6 RR's with Poly Locks, 7.05 pounds

Stock 87-93 Hood with latch and not much paint, 41.05 pounds

85 SVO Leather E Brake Handle, no hardware, 2.05 pounds

Weighed the center arm rest, 6.90 pounds, the 87-93 center console without the armrest and missing the ash tray door & shifter bezel is 5.45 pounds, 12.35 total with arm rest. Thats including the power mirror switch, ac bezel and radio frame.

SVO Steering Wheel, no leather wrap on the wheel itself, 5.55 pounds

Griffin Circle Track Aluminum Raditor, part number 1-26272-X, 15.45 Pounds

Stock HO Intake, nothing in it but a couple of sensors and the TB studs, 33.15 LB's

Edelbrock Performer 5.0 Intake, bare, 38.90 LB's

Smog Pump with the first part of line to the valve thing, no other piping, 8.45 LB's

Horns, 1.35 LB's

Windshield Wipers, 1.30 LB's

Wiper Arms under cowl panel, 1.85 LB's

Wiper Motor, 3.95 LB's

Cruise Control Canister thing up in the fendor, 2.50 LB's

AC Compressor w/ Small AC Bracket, 18.00 LB's

Cargo Cover, 4.90 LB's

94-95 Factory Strut Tower Brace, no hardware, 7.20 LB's

Factory 92-95 Mini Starter, 7.80 LB's

Harwood 3 Inch Pin On Cowl Hood, 15.70 LBS

Cobra R SVO Bolton Hood, no latch, unknown brand, 29.75 LBS

Insulation in hatch (not including attached to carpet) on 87-93 hatcback car, right at 10 LBS

PA Super Comp C4 w/ SFI Bellhousing, no fluid, 116.8 LBS

Continental 3800 Stall Converter, 30.75 LBS

Some stuff from a 95 GT:

Spare, 19.85 LBS

Jack, 5.75 LBS

Insulation in trunk, 1.70 LBS

Lug Wrench, 1.65 LBS

T56 out of a 93 Z28, probably similar weight to one for a Mustang Im sure, no bellhousing, no fluid, no clutch fork, 119.20 LBS

97 Cobra Wheel 17x8, 22.45 LBS

Weld Pro Star 15x8, 5 Lug, 14.05 LBS

Stock T5 Bellhousing, 10.85 LBS

FMS Aluminum Driveshaft, 13.70 LBS

Stock H Pipe w/ 4 Converters, 33.65 LBS

Offroad H Pipe, 17.35 LBS Front fog light bar, with lights - 20lbs A/C compressor - 17lbs 10 hole wheel with 235/60/15 SLX5000 tire - 46lbs MM Strut Brace - 8 lbs

PRO50SC

[sm=icon_stickpoke.gif][sm=icon_rofl.gif]

WhiteWindsor

I should have read it a while back. My race weight todaywith my big *** was #3370. Probably the easiest thing is for me to go on a diet lol.

rust_stang

How much does the front seats and rear seat in a notchback fox weigh?

w8less

hey if any of you guys want to weigh anything else let me know and i can add it in

rust_stang

how about my last post[&:]