5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

Dyno Numbers are In !!!!!

Thread Tools
 
Search this Thread
 
Old 06-27-2008, 01:53 PM
  #21  
jtmustang
5th Gear Member
 
jtmustang's Avatar
 
Join Date: Nov 2006
Location: arlington,WA
Posts: 3,743
Default RE: Dyno Numbers are In !!!!!

hey man...............[8D]..........those are some respectible numbers and 301 rwhp thats a good little motor u got there now..

and man u are taking it to the track already...[&:]

and low 13's maybe with those bald tires ,the last time i drove my car with a similiar setup with the stock 10 holes on the back i was spinning threw half of third and those had a lot of life left....i think u will be spinning like a **** with out really babying it out of the hole.and man there was no hard feelings on my part in your last thread i was just stating **** and my opinions , its all good....................................











........e thugger..........[8D]...............




just joking dude and lets see some videos or something of the new motor idleing or something.

i am shooting some paint on mine this weekend and then within the next month hope to have mine up on the dyno...


jtmustang is offline  
Old 06-27-2008, 02:01 PM
  #22  
jtmustang
5th Gear Member
 
jtmustang's Avatar
 
Join Date: Nov 2006
Location: arlington,WA
Posts: 3,743
Default RE: Dyno Numbers are In !!!!!

that is gonna be a fun street motor 301 hp at 4700 rpm's thats kinda low for your setup what was it doing after that?

wheres the dyno sheet. and how is the torque cuve..
jtmustang is offline  
Old 06-28-2008, 08:51 AM
  #23  
bikeboy587
4th Gear Member
Thread Starter
 
bikeboy587's Avatar
 
Join Date: Mar 2007
Location: Buffalo, NY
Posts: 1,541
Default RE: Dyno Numbers are In !!!!!

ill get the sheet up this afternoon.

the track was a SPINFEST. one I rolled out of the hole and didn't spin them but still had a ****ty 60'. time to order some tires with the next paycheck

On my over heating problem....my fan motor seized, the bearings ate themselves alive, so for the past 24 hours i have had no fan and therefore onle made 3 passes in the 4 hours I was at the track. looks like my new goals are low 13s on motor....here are the times

60' 2.229
1/8 9.115 @ 79.50
1/4 13.987 @ 102.02

60' 2.306
1/8 9.072 @ 80.72
1/4 13.875 @103.38

60' 2.248
1/8 8.952 @ 81.88
1/4 13.872 @ 101.99
(missed fourth on this run grrrr)


Another thing that surprised me...I'm top of 4th through the traps....looks like I'll be looking at a gear change with my nitrous.....

i'll try to get some better numbers with a cool car and some different tires at the 1/8 mile on tuesday.....i think there is a low 13 in the car if i can get some nice 1.9s
bikeboy587 is offline  
Old 06-28-2008, 09:48 AM
  #24  
bikeboy587
4th Gear Member
Thread Starter
 
bikeboy587's Avatar
 
Join Date: Mar 2007
Location: Buffalo, NY
Posts: 1,541
Default RE: Dyno Numbers are In !!!!!

here is a vid of one of my ****ty passes...damn lack of tires http://youtube.com/watch?v=PDWMKZ2-APY
bikeboy587 is offline  
Old 06-28-2008, 10:41 AM
  #25  
jtmustang
5th Gear Member
 
jtmustang's Avatar
 
Join Date: Nov 2006
Location: arlington,WA
Posts: 3,743
Default RE: Dyno Numbers are In !!!!!

man u need some tires on there that would definetely lower your 60's and low to mid 13's should be easy then no problem.
jtmustang is offline  
Old 06-28-2008, 10:51 AM
  #26  
bikeboy587
4th Gear Member
Thread Starter
 
bikeboy587's Avatar
 
Join Date: Mar 2007
Location: Buffalo, NY
Posts: 1,541
Default RE: Dyno Numbers are In !!!!!

after paying for the tune i'm tapped out but with next week's pay ill order a set fo sho
bikeboy587 is offline  
Old 06-28-2008, 11:42 AM
  #27  
OnyxCobra
6th Gear Member
 
OnyxCobra's Avatar
 
Join Date: Nov 2005
Location: Rochester, NY
Posts: 8,467
Default RE: Dyno Numbers are In !!!!!

damn man that's really surprising, way slower than I expected to see out of it.
OnyxCobra is offline  
Old 06-28-2008, 11:45 AM
  #28  
Stanpower
4th Gear Member
 
Stanpower's Avatar
 
Join Date: Sep 2006
Location:
Posts: 1,138
Default RE: Dyno Numbers are In !!!!!

It l@@ks like you smoked George in the 1/4 mile? What was he driving?
Stanpower is offline  
Old 06-28-2008, 11:48 AM
  #29  
bikeboy587
4th Gear Member
Thread Starter
 
bikeboy587's Avatar
 
Join Date: Mar 2007
Location: Buffalo, NY
Posts: 1,541
Default RE: Dyno Numbers are In !!!!!

George is in a 99 gt with a mid pipe, shift kit, and 3000k stall.

let me get some tires i'll get some good times
bikeboy587 is offline  
Old 06-28-2008, 12:11 PM
  #30  
OnyxCobra
6th Gear Member
 
OnyxCobra's Avatar
 
Join Date: Nov 2005
Location: Rochester, NY
Posts: 8,467
Default RE: Dyno Numbers are In !!!!!

Tires make all the difference but i still would have expected faster traps. I ran 13.8 @ 99 with gears, tires and exhaust.
OnyxCobra is offline  


Quick Reply: Dyno Numbers are In !!!!!



All times are GMT -5. The time now is 02:52 PM.