locking header bolts
#1
locking header bolts
Hey guys,
I need some locking header bolts... I have mac equal length headers...
do I get these - http://store.summitracing.com/partde...1&autoview=sku
or these - http://store.summitracing.com/partde...0&autoview=sku
or should I get one of these? http://store.summitracing.com/egnsea...=KeywordSearch
If yes then which one?
I believe the lengths are different... I kind of need to order them quickly, so... whenever you all could answer! Thanks
I need some locking header bolts... I have mac equal length headers...
do I get these - http://store.summitracing.com/partde...1&autoview=sku
or these - http://store.summitracing.com/partde...0&autoview=sku
or should I get one of these? http://store.summitracing.com/egnsea...=KeywordSearch
If yes then which one?
I believe the lengths are different... I kind of need to order them quickly, so... whenever you all could answer! Thanks
Last edited by cortlan; 12-24-2008 at 05:09 PM. Reason: had to add another link
#3
as said above the bolts that come with the headers work fine, just dab a little antisieze on em and install em, now let the engine run up to operating temp and let it cool down then retighten all your bolts, you may have to do this just once or several times depending on what gaskets are used till everything stays tight.
#4
I have had problems with header leaks... with my ceramic headers they keep backing out.... and with the engine bay being so congested on my 94 I want to lock them down once before I put the engine back in... then hopefully not have to worry about them much after that!
Calling out MJR46!!!! you've mentioned something about these before!
anyone have more input?
Calling out MJR46!!!! you've mentioned something about these before!
anyone have more input?
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
General Tech
0
09-25-2015 06:58 PM