When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
also if you don't have the 0/2's installed and or lets say they are installed, being where they are located = at / near ends of collector, readings will be skewed and could cause divibility issues when in closed loop operation......I'd put an exhaust on it soon
i got an exhaust just aint put it on yet, when you first start it it revs up to 3000 rpm and goes down to 1000 then idles for a little bit around 1000 and then dies