Head and Cam Combo - best for $700 - 800
10-12-2009, 09:23 PM
#2
3rd Gear Member
Join Date: Mar 2006
Location: Harleysville PA
Posts: 956
You are looking at a very cheap set of heads for 700-800 alone. Then you would have to get the springs to match the cam another $100, and your cam $200.
You could go with a set of gt40p heads off of an explorer you can pick up pretty cheap for like 200-300 then a mild cam after that with springs. You wont be looking at any kind of crazy setup for $800 bucks. Save up a little more or go for the gt40p
You could go with a set of gt40p heads off of an explorer you can pick up pretty cheap for like 200-300 then a mild cam after that with springs. You wont be looking at any kind of crazy setup for $800 bucks. Save up a little more or go for the gt40p
10-12-2009, 10:51 PM
#5
D.R. THE PATHETIC DORK
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
..........all that budget will allow is gt-40 heads and ots 169. dolla cam with matching springs and gaskets ect ect, IMO for the performance that'd deliver, you may not even notice it, and ls-1's would still eat you alive, I'd honestly save my money for better
10-12-2009, 11:14 PM
#6
Join Date: Aug 2008
Posts: 31
Im in the same boat as you. Low on income but looking for a little more fun factor on the street and maybe show up a few ricers. A set of GT40s and an off the shelf cam (TFS stage 1, Ive been told steeda makes a cam that works well on our cars) since you have a 95 i would also look for a 94-95 cobra intake. If you shop around you could get all that for under a grand. maybe around your price. GT40s arent the greatest heads but for the price they have to be better than the awful e7s right?
10-13-2009, 10:55 AM
#7
1st Gear Member
Thread Starter
Join Date: Aug 2009
Location: Michigan, Detroit
Posts: 60
i mean i was going to buy these heads off of my buddy for 650.
there e7 port and polished.
bored down to 58cc
and all this other stuff.
he said its bolt like 75 horsepower
or im just gonna wait for someone on a forum, or craigslist with a good set of used heads for like 500. or 600
there e7 port and polished.
bored down to 58cc
and all this other stuff.
he said its bolt like 75 horsepower
or im just gonna wait for someone on a forum, or craigslist with a good set of used heads for like 500. or 600
10-13-2009, 01:50 PM
#9
6th Gear Member
Join Date: Feb 2005
Location: KY
Posts: 13,396
i mean i was going to buy these heads off of my buddy for 650.
there e7 port and polished.
bored down to 58cc
and all this other stuff.
he said its bolt like 75 horsepower
or im just gonna wait for someone on a forum, or craigslist with a good set of used heads for like 500. or 600
there e7 port and polished.
bored down to 58cc
and all this other stuff.
he said its bolt like 75 horsepower
or im just gonna wait for someone on a forum, or craigslist with a good set of used heads for like 500. or 600
he isnt much of a buddy if he is trying to sell you e7's for 650. next time you see him give him a friendly swat in the *****
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
Lethal Performance
0
10-01-2015 08:58 AM
Boostaddict
3.7L V6 S550 Tech 2015 - 2017
0
10-01-2015 08:57 AM
