93 Reborn Build
#25
Well I got a chance to play with my motor a little bit last night. Without knowing it my motor had broken one of the 2 bolts that hold the cam thrust plate on and busted one of the ears off the plate. It wasn't a surprise to me luckily because I had opened up the motor last year and found the issue.
I couldn't get the bolt extracted so I just had to drill out the bolt and tapped the whole for a bigger bolt. instead of the 1/4 20 thread it is now a 5/16 18 thread (at least I think it was a 18). Either way it went down smoothly and now I can button up the bottom half of my motor finally once I get the gaskets.
I couldn't get the bolt extracted so I just had to drill out the bolt and tapped the whole for a bigger bolt. instead of the 1/4 20 thread it is now a 5/16 18 thread (at least I think it was a 18). Either way it went down smoothly and now I can button up the bottom half of my motor finally once I get the gaskets.
#27
Same motor as before pretty much
Non roller 306
Mildly home ported GT40's
Lunati Bracket Master II Cam (new part)
.512 lift / 292 duration (230 at .050) / 110 LSA / 2000-6000rpm
Edelbrock Performer Intake
Edelbrock Performer 600 Carb
MSD Blaster Box
MSD Blaster 2 Coil
FRPP Blue Wires
FRPP A/C Delete
Edelbrock 14" Air Cleaner
1" Carb Spacer
FRPP Headers (new part for the combo)
Mac Offroad H-Pipe
Mac Produmps with Tail Pipes
Non roller 306
Mildly home ported GT40's
Lunati Bracket Master II Cam (new part)
.512 lift / 292 duration (230 at .050) / 110 LSA / 2000-6000rpm
Edelbrock Performer Intake
Edelbrock Performer 600 Carb
MSD Blaster Box
MSD Blaster 2 Coil
FRPP Blue Wires
FRPP A/C Delete
Edelbrock 14" Air Cleaner
1" Carb Spacer
FRPP Headers (new part for the combo)
Mac Offroad H-Pipe
Mac Produmps with Tail Pipes
Last edited by projectresto83; 02-07-2010 at 09:43 AM. Reason: added cam specs
#30
That huge thing is sitting under the motor in one of the pics. I removed it awhile back. I am going to probably stick with the SN stuff from the junk yard to help make the steering better. I'm still keeping your offer on the table just in case I can't find what I need. I haven't made a trip to the junk yard yet due to the weather.