nitrous oxide question
11-14-2010, 05:38 PM
#11
D.R. THE PATHETIC DORK
Join Date: Jun 2007
Location: West Virginia
Posts: 30,863
04-10-2011, 01:18 AM
#12
Thread Starter
Join Date: May 2010
Location: poland
Posts: 15
Thanks guys, I bought a new lower and upper control arm, Umi performance, Lx rear springs installed a 4 cyl, tires M / T ET Drag 26/10 15 ", my 60 ft 1.77 s (their previous 2.2 s)
My question;
change the front springs? Can I remove the rear subframe?
My question;
change the front springs? Can I remove the rear subframe?
04-10-2011, 03:43 AM
#13
6th Gear Member
Join Date: Jan 2008
Location: colorado
Posts: 6,395
I pull better 60's with stock springs. what shocks and struts do you have?
04-10-2011, 08:59 AM
#14
4th Gear Member
Join Date: Jul 2008
Location: alabama
Posts: 1,812
Dry kits in my opinion suck *****! I used one. Get a wet plate system if you truely want to be happy! All forged internals spray 200! Thats what I spray and I dont have all forged! I sprayed 150 on stock crank and rods for 3 yrs. Never hurt anything. But you do have to take the nessesary precautions! Anything over 150 requires better than 93 oct.
04-10-2011, 03:00 PM
#17
Thread Starter
Join Date: May 2010
Location: poland
Posts: 15
My Mustang weighs 2,800 lbs, I do not have stock springs, the front is Vogtland -1.2 "lower, 2.3 lx rear, front shock absorbers, and rear Tokiko (normal)
Last year I went from 75 HP nitrous, tires, 265/35 ZR19 "my best 60ft 2.2 sec. Now the M / T drag 26/10-15" and the new control arm is a very big difference I can move 4000RPM, (their previous first 60ft smoked tires)
Have not yet tried to go with nitrous.
This winter I replaced stock rod bolt on ARP Pro Series Wave-Loc Rod Bolts, I think that my beloved 302 does not disappoint me with 100HP shot
Last year I went from 75 HP nitrous, tires, 265/35 ZR19 "my best 60ft 2.2 sec. Now the M / T drag 26/10-15" and the new control arm is a very big difference I can move 4000RPM, (their previous first 60ft smoked tires)
Have not yet tried to go with nitrous.
This winter I replaced stock rod bolt on ARP Pro Series Wave-Loc Rod Bolts, I think that my beloved 302 does not disappoint me with 100HP shot
04-11-2011, 02:03 AM
#19
6th Gear Member
Join Date: Oct 2005
Location: st clair shores MI
Posts: 6,028
are u sure of this ? cuz that is SUPER light for a sn95 car. my stripped fox notch is 2950
yeah u need to get that down to a 1.65-1.75
it wont.....it'll knock 1 second plus off your ET
yeah u need to get that down to a 1.65-1.75
it wont.....it'll knock 1 second plus off your ET
04-11-2011, 12:59 PM
#20
Thread Starter
Join Date: May 2010
Location: poland
Posts: 15
this is my mustang 2 years ago
http://www.youtube.com/watch?v=Y8AQrvoU8Mk
I know that 2800 lbs is very little weight, I was surprised as I weighed mustang.
I hope this year to make a 1 / 4 miles low 12.
After 3 attempts to 60 ft on my new M / T drag I'm full of optimism
nitrous_bob
down to a 1.65-1.75 it would be cool
http://www.youtube.com/watch?v=Y8AQrvoU8Mk
I know that 2800 lbs is very little weight, I was surprised as I weighed mustang.
I hope this year to make a 1 / 4 miles low 12.
After 3 attempts to 60 ft on my new M / T drag I'm full of optimism
nitrous_bob
down to a 1.65-1.75 it would be cool
