mustang283

just now getting my promotion t5 (this thread is not about the transmission lol)... Just wondering if this clutch will work with it and my 5.0(5.4)

http://www.jegs.com/i/Centerforce/183/DF161057/10002/-1

And it says I have to get the centerforce throwout bearing, or could I get the ford racing one?

I was going to get a clutch cable kit too The steeda one.

Thanks alot!!

Or would the HD king cobra clutch be better? (im leaning towards this one, and i want a stiff pedal, i think its what i origoanlly had)
Ford Racing M-7560-C302N

http://cgi.ebay.com/ebaymotors/Ford-...Q5fAccessories

mjr46

CF/DF AND whatever TOB is fine = /thread

mustang283

okay, so that one in the link will work? because it says aftermarket transmissions only.

Just wondering. sorry, i just want to make super sure before i buy hundreds of dollars worth of stuff...

will that centerforce hold up good? does it have a stiff feel? Its not like a stock replacement is it?

AdderMk2

as much as I dont like CF clutches, if thats your only option, that what you should run. I'd never run a king cobra.

mjr46

if you want a stiff pedal, I have a few used cables that'll give you just that.....

mustang283

ok im just wondering what centerforce clutch i should get? Is that a good one to get? It is not my only option.

and i am already buying the steeda clutch cable kit.

Bubba 95SN

Steeda and Ram is what I used, muscle car kit. Ram 92974

mjr46

centerforce is designed with it's patented weight system to give an easier pedal, why would you want a stiff pedal?? it has to give somewhere, meaning all the stress, which is often at the firewall, I have welded up more than one firewall because of such..... good luck

mustang283

because i like a stiff pedal.

thanks


someone can close this thread.

mjr46

VERY WELL since you wish not to learn, your wish is my command!!