1993foxy

Hey guys I am buying a 1993 LX and I was wondering what kind of mods I should do first. The car is all stock except for a flowmaster exhaust and a short throw. I am debating if i should start with the exterior first and make it look good or go ahead and tear in to the motor. Let me know what you guys think and some of the best mods for the motor that I should do. The only thing I may do to the exterior is hood and rims but if you have any ideas let me know.

mjr46

not tech!!!!

GTnotchback

5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

Are you saying this shouldnt be posted here? where should he put it?

19stang88

What is your budget? I would start with gears.

1993foxy

Really i dont have a budget I have a decent job but i can always save lol

nitrous_bob

4.10 gears
mickey thompson ET streets
100 shot of nitrous

then do heads, cam and intake after that

9redfox3

Gears ? 355's-373's 0r 410's

nitrous_bob

4.10 or leave them stock

19stang88

suspension, h/c/i swap 3.73 or 4.10's, supporting mods and a good driver. If money isn't an issue, you can build one nasty ride.

kweb288

nitrous.....
Start with somehting simple (depending on your experiance level) and work up from there

Gears, exhaust, suspension, cooling modifications are a good place to start