MustangForums.com

5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

i wanna go fast!!!er this new year

Thread Tools
 
Search this Thread
 
Old 01-02-2011, 04:22 PM
  #1  
slowmofive089
1st Gear Member
Thread Starter
 
slowmofive089's Avatar
 
Join Date: Mar 2010
Location: ca
Posts: 53
Default i wanna go fast!!!er this new year
tip for the new year evryone, add some water to the crank case and use the steam to pick up some hp. anyone got other helpful tips?---- HAHA happy new year everyone
slowmofive089 is offline  
Old 01-02-2011, 04:59 PM
  #2  
P Zero
5th Gear Member
 
P Zero's Avatar
 
Join Date: Jun 2005
Location: Michigan
Posts: 3,986
Default
Why don't you put some water in your own crankcase *******.
P Zero is offline  
Old 01-02-2011, 05:14 PM
  #3  
sn95_331_GT_ yellow
5th Gear Member
 
sn95_331_GT_ yellow's Avatar
 
Join Date: Mar 2008
Location: CT
Posts: 2,394
Default
Originally Posted by P Zero
Why don't you put some water in your own crankcase *******.
hahaha
right? taking advice from a guy with a 70mm MAF, b cam (btw, 1.7's= .510 lift), and a tune for a stock setup... lol
sn95_331_GT_ yellow is offline  
Old 01-02-2011, 05:34 PM
  #4  
P Zero
5th Gear Member
 
P Zero's Avatar
 
Join Date: Jun 2005
Location: Michigan
Posts: 3,986
Default
Originally Posted by sn95_331_GT_ yellow
hahaha
right? taking advice from a guy with a 70mm MAF, b cam (btw, 1.7's= .510 lift), and a tune for a stock setup... lol
At least his pistons are teflon coated.
P Zero is offline  
Old 01-02-2011, 06:50 PM
  #5  
sn95_331_GT_ yellow
5th Gear Member
 
sn95_331_GT_ yellow's Avatar
 
Join Date: Mar 2008
Location: CT
Posts: 2,394
Default
Originally Posted by P Zero
At least his pistons are teflon coated.
just like ceramic apex seal in a rotary motor...

one more thing to make you think youre gonna be faster...

Wiseco makes their piston SOOOOOOOO tight you wouldnt think theyd fit, in fact, they almost dont... but they have no coating and are the best money (IMO) you can spend on pistons... coating are wives tales...
sn95_331_GT_ yellow is offline  
Old 01-02-2011, 07:23 PM
  #6  
5.0kid
5th Gear Member
 
5.0kid's Avatar
 
Join Date: Dec 2006
Location: The mitten
Posts: 2,525
Default
do they even coat hyper pistons ? thats a new one
5.0kid is offline  
Old 01-02-2011, 08:49 PM
  #7  
P Zero
5th Gear Member
 
P Zero's Avatar
 
Join Date: Jun 2005
Location: Michigan
Posts: 3,986
Default
Originally Posted by sn95_331_GT_ yellow
just like ceramic apex seal in a rotary motor...

one more thing to make you think youre gonna be faster...

Wiseco makes their piston SOOOOOOOO tight you wouldnt think theyd fit, in fact, they almost dont... but they have no coating and are the best money (IMO) you can spend on pistons... coating are wives tales...
Coatings do in fact reduce friction. However, this is typically only applied to race engines as they're torn down after every race and pretty much everything is replaced. I know some street vehicles that were equipped with coated pistons wore the coating away and caused bigtime issues (Chevy Malibu).
However, the gain on a street engine is negligible.
I've heard some people with old Chevy's have lots piston skirt wear. Where in fact the coatings do help out. But it's only necessary for that purpose. I've torn down lots of 302's and they typically don't have any wear on the skirts.
Originally Posted by 5.0kid
do they even coat hyper pistons ? thats a new one
As a matter of fact they do. Federal Mogul makes the SpeedPro line of coated hypereutectic pistons. as a matter of fact I put a set in a Saturn engine I rebuilt a few years ago. Little did the buyer know that that 1.9L in there was actually a 2.1.
P Zero is offline  
Old 01-02-2011, 09:22 PM
  #8  
nightcrawler52
2nd Gear Member
 
nightcrawler52's Avatar
 
Join Date: Jan 2008
Location: California
Posts: 228
Default
Originally Posted by slowmofive089
tip for the new year evryone, add some water to the crank case and use the steam to pick up some hp. anyone got other helpful tips?---- HAHA happy new year everyone
Is this supposed to be like this MarkNieb guy???

https://mustangforums.com/forum/5-0l...-this-car.html
nightcrawler52 is offline  
Old 01-02-2011, 09:39 PM
  #9  
P Zero
5th Gear Member
 
P Zero's Avatar
 
Join Date: Jun 2005
Location: Michigan
Posts: 3,986
Default
Originally Posted by nightcrawler52
Is this supposed to be like this MarkNieb guy???

https://mustangforums.com/forum/5-0l...-this-car.html
HAHAHAHHA!!!!

Originally Posted by PRO50SC
YOU REALLY ARE A MORON. CONSIDER TAKING MASS TRANSIT!!!

YOU CAN NOT RUN WATER THROUGH THE CRANKCASE OF AN ENGINE. IT IS NOW SEIZED UP AND WILL NEED REPLACING. PLEASE FIND ANOTHER HOBBY BECAUSE YOU SUCK AT THIS ONE!!!
P Zero is offline  
Old 01-02-2011, 10:20 PM
  #10  
slowmofive089
1st Gear Member
Thread Starter
 
slowmofive089's Avatar
 
Join Date: Mar 2010
Location: ca
Posts: 53
Default
hah a wow you guys are really ate up lol sorry to make you all so mad over a joke. bunch of sour pu**es. and yea for you info my car is super fast. like really really fast faster then your cars. i bet yous dont even own mustangs. haha sorry did that up set some of you? how about a new tip for this year RELAX
slowmofive089 is offline  



Advanced Search
Quick Reply: i wanna go fast!!!er this new year


Reply Closed Thread Share
Forum Jump

All times are GMT -5. The time now is 02:10 AM.