21 gun salute to my tranny lol!
#12
Here are a few of the pics for you!
first one is my old clutches and steel,
second is input shaft and the first set of clutches!
third is the planetary gear set!
http://img36.imageshack.us/i/031011211946.jpg/
http://img836.imageshack.us/i/031011212801.jpg/
http://img109.imageshack.us/i/031111105935.jpg/
first one is my old clutches and steel,
second is input shaft and the first set of clutches!
third is the planetary gear set!
http://img36.imageshack.us/i/031011211946.jpg/
http://img836.imageshack.us/i/031011212801.jpg/
http://img109.imageshack.us/i/031111105935.jpg/
Last edited by Venomantidote95; 05-08-2011 at 01:36 AM.
#13
Here the first and second is the output shaft showing the direct drive clutch pack.
third and fourth is teh planetary sun gear and output shaft and dd clutches disassembled.
http://img10.imageshack.us/i/031111111545.jpg/
http://img405.imageshack.us/i/031111111554.jpg/
http://img546.imageshack.us/i/031111112025.jpg/
http://img29.imageshack.us/i/031111112314.jpg/
third and fourth is teh planetary sun gear and output shaft and dd clutches disassembled.
http://img10.imageshack.us/i/031111111545.jpg/
http://img405.imageshack.us/i/031111111554.jpg/
http://img546.imageshack.us/i/031111112025.jpg/
http://img29.imageshack.us/i/031111112314.jpg/
#14
First here is the empty case.
second midway reassembly.
third all buttoned up.
fourth is where the magic happens vlv body mating surface.
http://img15.imageshack.us/i/031111121457.jpg/
http://img10.imageshack.us/i/031111174301.jpg/
http://img42.imageshack.us/i/031111195122.jpg/
http://img821.imageshack.us/i/031211154841.jpg/
second midway reassembly.
third all buttoned up.
fourth is where the magic happens vlv body mating surface.
http://img15.imageshack.us/i/031111121457.jpg/
http://img10.imageshack.us/i/031111174301.jpg/
http://img42.imageshack.us/i/031111195122.jpg/
http://img821.imageshack.us/i/031211154841.jpg/
#15
If you have any specific questions just pm i dont mind, i thought about going into the overhaul step by step but i dont have the time to do it.
overall it wasnt bad!
I replaced all clutches and steel and new epc solenoid, and freshened the vlv body!
overall it wasnt bad!
I replaced all clutches and steel and new epc solenoid, and freshened the vlv body!
#17
It is doing great so far trying to get about 500 miles before i hit the track and see just how good it turned out! I have been riding my bike since gas has been up and it has been such great weather!
Thread
Thread Starter
Forum
Replies
Last Post
treesloth
New Member Area
4
09-28-2015 07:03 AM