Door Hinge Roller missing on driver side? - MustangForums.com


5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

Reply
 
 
 
Thread Tools Search this Thread
Old 06-26-2011, 04:21 PM   #1
9redfox3
4th Gear Member
Thread Starter
 
9redfox3's Avatar
 
Join Date: Oct 2009
Location: Pennsylvania
Posts: 1,762
Default Door Hinge Roller missing on driver side?

I just noticed I'm missing Door Hinge Roller. The hinge is not broken but roller is missing How hard is it to put a new one in? The door seems to work find with out it......... Thanks !
9redfox3 is offline   Reply With Quote
Old 06-26-2011, 06:24 PM   #2
mjr46
D.R. THE PATHETIC DORK
 
mjr46's Avatar
 
Join Date: Jun 2007
Location: West Virginia
Posts: 30,741
Default

if the splined pin is still in place that hold the roller there, getting the proper angle to drive the pin out will be key I had the door off mine making it easy, 50resto.com sells the part iirc
mjr46 is offline   Reply With Quote
Old 06-26-2011, 07:27 PM   #3
9redfox3
4th Gear Member
Thread Starter
 
9redfox3's Avatar
 
Join Date: Oct 2009
Location: Pennsylvania
Posts: 1,762
Default

Well there's no pin just hinge so its just a matter of putting the roller in between the hinges and knocking the pin in right? thanks
9redfox3 is offline   Reply With Quote
Old 06-26-2011, 08:35 PM   #4
mjr46
D.R. THE PATHETIC DORK
 
mjr46's Avatar
 
Join Date: Jun 2007
Location: West Virginia
Posts: 30,741
Default

yup^^
mjr46 is offline   Reply With Quote
Old 07-07-2011, 07:17 AM   #5
9redfox3
4th Gear Member
Thread Starter
 
9redfox3's Avatar
 
Join Date: Oct 2009
Location: Pennsylvania
Posts: 1,762
Default

I got the new Door Hinge Roller and when I tried install the set pin first to slide through the roller the pin dosen't clear the inside hinge goes in on a angle,so i'm assuming the door must come off? Anybody ever install one with out removing door or fender? What a pain in the *** to install this must be an easier way ! yes /no ?
9redfox3 is offline   Reply With Quote
Old 07-07-2011, 07:50 AM   #6
mjr46
D.R. THE PATHETIC DORK
 
mjr46's Avatar
 
Join Date: Jun 2007
Location: West Virginia
Posts: 30,741
Default

IIrc i've used a set of punches and or an air hammer, if not last one I did door was off
mjr46 is offline   Reply With Quote
Old 06-14-2012, 09:48 AM   #7
Addison
 
Join Date: Jun 2012
Location: United States
Posts: 5
Default

The only negative thing I can say about it, is that it isnt draft proof at the top
something I did not consider when making comparisons, but having said that,
I would have still chosen a roller all things considered.
Addison is offline   Reply With Quote
Old 06-14-2012, 02:54 PM   #8
mjr46
D.R. THE PATHETIC DORK
 
mjr46's Avatar
 
Join Date: Jun 2007
Location: West Virginia
Posts: 30,741
Default

Quote:
Originally Posted by Addison View Post
The only negative thing I can say about it, is that it isnt draft proof at the top
something I did not consider when making comparisons, but having said that,
I would have still chosen a roller all things considered.
mjr46 is offline   Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
First Mustang 99' 3 differnt body kits installed TimeLord101 New Member Area 3 09-04-2015 10:27 AM
Help! Metra 70-5521 AMP Harness Install cbird1177711 2005-2014 Mustangs 2 09-03-2015 09:43 PM
'11 to '13 tail light swap amandahchase General Tech 0 09-03-2015 11:09 AM
Hydro dipped carbon fiber Fuel Door SYNY5TER Parts For Sale 0 09-02-2015 02:35 AM


Tags
2000, 99, bushings, door, driver, ford, hinge, hinges, lower, mark, mustang, replace, restoring, roller, side, viii

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump


All times are GMT -5. The time now is 08:50 PM.