Removing gt body kit
#1
Removing gt body kit
Hello fellas,
So, I am not the biggest fan of the gt and how it looks, so I would like to take the gt body kit off of the car. I know I have to get lx front and back bumpers. Any suggestions as far as taking the kit off, is it just screwed on or is it more complicated than I can hope? Any suggestions would be excellent. Have a good one guys.
So, I am not the biggest fan of the gt and how it looks, so I would like to take the gt body kit off of the car. I know I have to get lx front and back bumpers. Any suggestions as far as taking the kit off, is it just screwed on or is it more complicated than I can hope? Any suggestions would be excellent. Have a good one guys.
#3
Alright, for some reason I remember someone mentioning that the ones on the side are hard to get off, is it also because of rivets, do I just drill the rivets out? I have never dealt with rivets before, pathetic i know.
#4
You realize you'll have visible holes after the conversion unless you weld them right? I've always just drilled rivets out. I just start with one size bigger than what fits in the hole and go from there until I get the right size then do the rest. Don't know if that's the best way or not.
And SKAR is right, I *think* you have 4 bolts on each side holding it to the fender and I *think* it's 4 rivets on top along with 2 bolts on top in the middle.
And SKAR is right, I *think* you have 4 bolts on each side holding it to the fender and I *think* it's 4 rivets on top along with 2 bolts on top in the middle.
Last edited by Five0hFox; 11-01-2011 at 12:54 AM.
Thread
Thread Starter
Forum
Replies
Last Post
Boostaddict
Lethal Performance
2
09-08-2015 09:56 PM