my budget build for 2013 gathering up the pieces !
#1
my budget build for 2013 gathering up the pieces !
I got the gt 40 heads F3ZE ,all cleaned up and redone no port work just springs seals etc ready to bolt on.Cobra upper/lower intake,cobra valve covers,crane energizer 1.7 rockers,factory gt HO cam that's already in the car,255 walbro fuel pump,accufab 70mm tb and summit 75mm 19lbs maf. Going to leave the factory 19lbs injectors in from the car.. bbk shorty headers,h-pipe high flow cats,Also clutch flywheel,pilot bearing, throwout bearing,etc.... I got all summer to work on this and finding good deals on the corral. Looking to get around 250hp at the tires? I'm open for thoughts and suggestions on my build ! Going to be installing Maximum Motorsports Full Length Subframe Connectors in the next 4 weeks or so to give the car added strength for the extra horse power ..
Last edited by 9redfox3; 04-24-2012 at 05:35 PM.
#2
go 24's, I have a set some one painted red that the red paint is coming off and can learly see they are frpp blue tops 30 shipped and they are yours
http://s242.photobucket.com/albums/f...=89conv024.jpg
http://s242.photobucket.com/albums/f...=89conv024.jpg
Last edited by mjr46; 03-10-2012 at 10:56 AM.
#5
#6
#7
I dont think you quite caught the point of my post. I want to know how much you spent for them. I'm pretty sure I ****ed myself hard by letting the machine shop rebuild them. I just want to see how bad. If its really that bad, I might just squirrel them away somewhere and take them out when I build my Miata next year.
#8
You been on the corral they're going for anywhere from $300 up $600 depending on the condition and whats done to them springs kits -port work etc....I find it hard to believe you would screw yourself AdderMk2 ..........no not you ! I hoped this helped anyway i'm in that range with free shipping ! lol
#10
I'm kinda curious on what you paid now Keith.....
Be sure to open up the intake port to match that TB. There is no reason why you won't have 250rwhp. Its a good little boost in the seat of the pants with the cobra top end
Mike, Wish I would have known you had a set that cheap...I paid $75 for a set last week. Do you have a MAF to match? Still need one for my 24lb setup......
Be sure to open up the intake port to match that TB. There is no reason why you won't have 250rwhp. Its a good little boost in the seat of the pants with the cobra top end
Mike, Wish I would have known you had a set that cheap...I paid $75 for a set last week. Do you have a MAF to match? Still need one for my 24lb setup......