9redfox3

I'm a big fan of the stock cam 1.72 combo for a nice daily driver type car. Makes good torque and smooth thru the range.Just got a nice set of ceramic shorty headers and high flow cats h-pipe

9redfox3

Getting my mm subframe connectors ready for install matched to the underneath color of car.Cleaned with brake cleaner, primer / top coated welding them in this Saturday ..



Also in the near future going to be installing Chrome Moly Urethane Control Arm Suspension/Urethane 8.8" Housing Bushings kit !

Tony71502

Urethane in stock control arms?

9redfox3

Ya I know there not the most expensive and more on the bottom end products but for what I'm doing with this car I feel this is all I need, also will be grinding off paint where the welds need to go on the subconnectors just felt it was easier to paint off the car .....
Here's a pic of the control arms looking into getting !
http://www.uprproducts.com/mustang-c...nsion-kit.html

9redfox3

Ok Today me and a friend Installed my Subframe connectors welded them in with no issues nice and tight pretty good fit! "Take a Look"
Next install will be Walbro 255 fuel pump ! and than getting ready to rebuild top end of engine more pics to come !


End Result Finished Look !

bluebeastsrt

The spray bombed bottom looks pretty good.

9redfox3

Thanks in was originally done with porch 15 and top coated with rustoleum regal red still had the color and matched it right back up !

302army187

shouldn't have a problem hitting your goal.

your getting a offroad mid pipe too right?

9redfox3

No high flow cats h-pipe..

302army187

ewwwww