Go Back   MustangForums.com > Ford Mustang Tech > 5.0L (1979-1995) Mustang > 5.0L General Discussion
Sign in using an external account
Register Forgot Password?
Search


5.0L General Discussion This section is for non-tech specific information pertaining to 5.0L Mustangs.

Welcome to Mustang Forums!
Welcome to Mustang Forums.

You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!


Reply
 
 
 
 
Thread Tools Search this Thread
Old 07-08-2013, 04:53 PM   #11
bluebeastsrt
6th Gear Member
 
bluebeastsrt's Avatar
 
Join Date: Jun 2006
Vehicle: 1995 mustang GT
Location: Jersey
Posts: 10,510
ItsUrFuneral
Default

Even then dynos varies wildly from one shop to the next and depending on the type of dyno used. Get it running right and make a few clean passes at the drag strip for an indication of how much power your making. But my guess is 267.7451 WHP.
This ad is not displayed to registered or logged-in members.
Register your free account today and become a member on Mustang Forums!
__________________
ENGINE363 fully forged dart engine on the way with more spray!TRANNY C4 with trans brake, 3800 stall, 9in. raceconverter, hurst shifter REAR Moser 35 spline kit with spool, FRPP 3.73 gearsSUSPENION UPR pro street Uppers & lower control arms, Strange 10 way dampers, coilovers up front, BBK sub frame connectors, UPR Tube K-member & A-arms10.57@123.9 (OLD 5.0)
2011 CamaroSS 12.34@110.92
bluebeastsrt is online now   Reply With Quote
Old 07-08-2013, 05:41 PM   #12
dawson1112
5th Gear Member
 
Join Date: Jul 2012
Vehicle: 1990 lx hatch 5.0
Location: ohio
Posts: 2,710
Default

Quote:
Originally Posted by bluebeastsrt View Post
Even then dynos varies wildly from one shop to the next and depending on the type of dyno used. Get it running right and make a few clean passes at the drag strip for an indication of how much power your making. But my guess is 267.7451 WHP.
Lmao that's one hell of a calculated guess... all the way down to ten one thousandths hp .. Do mine ,, its a mustang , has some simple mods , and its blue..
__________________
dawson1112 is offline   Reply With Quote
Old 07-08-2013, 07:41 PM   #13
Duncan_GT
4th Gear Member
 
Duncan_GT's Avatar
 
Join Date: Jun 2011
Vehicle: 95 GT
Location: Indy
Posts: 1,353
Default

Quote:
Originally Posted by dawson1112 View Post
Lmao that's one hell of a calculated guess... all the way down to ten one thousandths hp .. Do mine ,, its a mustang , has some simple mods , and its blue..
Flames and a spoiler are good for a tenth in the quarter
__________________
1995 Mustang GT
1999 F150 Lariat 4x4

Soon to come: 393 stroker
351w bored .030, Probe Industries forged internals, Trickflow 205's, FTI custom cam, Trickflow R 90mm intake, Accufab 90mm TB, FRPP 42lb injectors, 1 3/4" custom Accufab LT's, 3" exhaust, MS2
Duncan_GT is offline   Reply With Quote
Old 07-08-2013, 07:50 PM   #14
dawson1112
5th Gear Member
 
Join Date: Jul 2012
Vehicle: 1990 lx hatch 5.0
Location: ohio
Posts: 2,710
Default

Quote:
Originally Posted by Duncan_GT View Post
Flames and a spoiler are good for a tenth in the quarter

I hear if you put a weed wacker muffler on you really feel the difference.
__________________
dawson1112 is offline   Reply With Quote
Old 07-08-2013, 08:03 PM   #15
dawson1112
5th Gear Member
 
Join Date: Jul 2012
Vehicle: 1990 lx hatch 5.0
Location: ohio
Posts: 2,710
Default

Quote:
Originally Posted by The Wacos Kid View Post
Hello all!

I am new to the mustang world and just bought a 1990 fox body 5.0. Listed below are the mods that have been made. Currently it has 2.73 gears so I am hoping to get 4.10s. It is a manual and needs a dyno tune because I timed it by ear myself.

302 that is punched .30 over with all new internal and some external parts. New parts include: Cast iron gt40 heads, Ford Racing (Pistons, E303 cam, lifters, push rods, 32 pound fuel injectors, valve covers), Scorpion 1.72 rocker arms, Summit Racing (Gear drive, high flow oil pump, lower intake, EGR valve, 75mm throttle body, 1 in. intake manifold spacer, high flow fuel pump), Trick Flow RS (Race Series) 75mm upper intake, BBK (Mass air sensor matched to 75mm throttle body, shorty headers, off road H-Pipe with 40 series Flowmaster single chamber mufflers turned down at center of car).

Driving the car, it honestly seems like a turd. But with all that it should have some more juice to it...

Thank you for the help!
Welcome to MF op.

You will find some very knowledgeable diehards here , they can help you a great deal if you learn to sift through the bull. And it wont take you long to figure out who to listen to and who to ignore , bull**** is called out here on a daily schedule.
__________________
dawson1112 is offline   Reply With Quote
Old 07-08-2013, 09:29 PM   #16
Duncan_GT
4th Gear Member
 
Duncan_GT's Avatar
 
Join Date: Jun 2011
Vehicle: 95 GT
Location: Indy
Posts: 1,353
Default

In regards to the OP, gears will really wake that thing up
__________________
1995 Mustang GT
1999 F150 Lariat 4x4

Soon to come: 393 stroker
351w bored .030, Probe Industries forged internals, Trickflow 205's, FTI custom cam, Trickflow R 90mm intake, Accufab 90mm TB, FRPP 42lb injectors, 1 3/4" custom Accufab LT's, 3" exhaust, MS2
Duncan_GT is offline   Reply With Quote
Old 07-11-2013, 12:15 AM   #17
Strokednforged
 
Join Date: Jul 2013
Vehicle: 93 ford mustang
Location: Vt
Posts: 43
Default Octane stuff lmfao!!!

Quote:
Originally Posted by dawson1112 View Post
The injectors are not to big , ecm will look at 02s maf and air temps if its to rich it will shorten pulse width . So instead of being at say .. 80 percent duty cycle the injectors will run at maybe 60 pecent duty cycle . With that set up I wouldn't expect them to be running much over 50 or 60% which leave about 25 to 35 % duty to play with later on if you decide to start adding more power to it. Don't waste your money on that 108 octane stuff they sell at autozone , instead take that 5 bucks to subway and get a sandwich it will give you more energy that the 108 will give your car. Your car feels like a turd because someone went to the trouble of doing the work to the motor first instead of upping the gear ratio first. Gear it time it drive it.... and if you can get some longtubes on those heads , The car will wake up with a shot of adrenalin like you wouldn't believe.

That octain stuff is $16.oo qt and will help any cars injectors n fuel system in general ;-) as it is a complete fuel system cleaner and boosts yer octain up to 7 points!!! (CAN'T HURT ALTHOUGH NOT A CURE FOR YER PROBLEM) any car u just purchased could use a tune up,oil change and an overhaul in general lol!!! I own a 600hp supercharged, stroked, 93 fox not much left to the imagination in mods from throttle body to exhaust! I did not build car personally however a wrench head clearly did (with no expense spared well over 30k in mods interior,paint,motor,trans,suspension n on n on!!! (That being said that 108 octain stuff made my beast run a tad nicer in argueably!) swak ;-)
Strokednforged is offline   Reply With Quote
Old 07-11-2013, 12:15 AM
MustangForums
Ford Mustang




Paid Advertisement

 
 
 
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Advertising

Featured Sponsors
Vendor Directory
New Sponsors
All times are GMT -5. The time now is 11:09 PM.

© Internet Brands, Inc.


This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company
Emails Backup