Header Fasteners
#12
i used mr gasket header bolts.i ended up grinding the box end of a old 7/16ths wrench down to clear the header tubes.i tightened them down as tight as i could go and they never did come loose on me.
#14
The Loctite will just burn off . Anti seize is a good idea on any thing that gets hot like that , but it is a must any time you introduce steel bolts to an aluminum bolt hole, such as aluminum heads. More times than not if no anti seize is used , when you remove the steel bolts it will take the aluminum threads with it or it will be so seized up the bolt will break.
Thread
Thread Starter
Forum
Replies
Last Post
junior04
4.6L (1996-2004 Modular) Mustang
1
09-28-2015 10:53 AM
trashxtrash
4.6L (1996-2004 Modular) Mustang
4
09-20-2015 10:49 PM