When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I just bought a 331 stroked block with reverse dome piston. I'm looking to use performer RPM 2.02. I was wondering if installing the F303 cam would be good with piston to valve clearance
You have to measure PV clearance reguardless of what every new cam you use. I'd go with a better cam than what you mentioned. Custom grind is best. Also measure for correct push rod lenth now that your changing valve train geometry. Good luck.
I just bought a 331 stroked block with reverse dome piston. I'm looking to use performer RPM 2.02. I was wondering if installing the F303 cam would be good with piston to valve clearance
lol...302 parts on a stroker........if you want an off the shelf cam, comp has the xfi series designed for stroker applications or better yet.....email this guy and non other : www.flowtechinduction.com Also, do a little more research on head choice......if the eddy rpms are a 170cc intake runner head you have choose........you'd be wise to look into a larger volume runner head for a well built stroker......min 185 and even better a 205 head
I recommend trick flow twisted wedge 11R 205cc series heads. If your on a tighter budget you can go with TF 190cc fast as cast heads. I have the 190s on my 363 stroker. They flow very well for a 190 head.
stroker + stock block + boost= bad idea.....unless you keep the boost at a min 8-10 psi have the tune on and keep rpm under 6500, then it'll live for a decent while.....but still a gamble