colonjavier1

I just bought a 331 stroked block with reverse dome piston. I'm looking to use performer RPM 2.02. I was wondering if installing the F303 cam would be good with piston to valve clearance

bluebeastsrt

You have to measure PV clearance reguardless of what every new cam you use. I'd go with a better cam than what you mentioned. Custom grind is best. Also measure for correct push rod lenth now that your changing valve train geometry. Good luck.

mjr46

lol...302 parts on a stroker........if you want an off the shelf cam, comp has the xfi series designed for stroker applications or better yet.....email this guy and non other : www.flowtechinduction.com Also, do a little more research on head choice......if the eddy rpms are a 170cc intake runner head you have choose........you'd be wise to look into a larger volume runner head for a well built stroker......min 185 and even better a 205 head

colonjavier1

What head do you recommend?

colonjavier1

Patriot performance head with 60cc chambers 2.02 intake/1.60 excaust

bluebeastsrt

I recommend trick flow twisted wedge 11R 205cc series heads. If your on a tighter budget you can go with TF 190cc fast as cast heads. I have the 190s on my 363 stroker. They flow very well for a 190 head.

colonjavier1

I'm also going to add a vortex have charger that I have would that all work

mjr46

stroker + stock block + boost= bad idea.....unless you keep the boost at a min 8-10 psi have the tune on and keep rpm under 6500, then it'll live for a decent while.....but still a gamble

colonjavier1

AFR-1492 185cc 60cc 2.02/1.60 outlaw street heads. This be perfect then.

mjr46

not bad choice