Need ideas for street/drag car
#2
goals and budget and what do you expect out of the car? is it a Daily driver? do you need to pass emissions do you have any parts yet? Do you have another car to drive? What are you mechanical ability's ?
#3
Well I do have another car I do all the work on it myself no I don't have to pass emissions. It's a older 302 with elderbrock intake manifold and a elderbrock carb ngk spark plugs stock distributor short headers x pipe 40 series flowmaster.
#6
If you have to save up the money first, I'd just grab a complete 8.8 rearend off Craigslist with a set of steaper gears already installed. Swap that in and enjoy till you figure out what you want. I've found complete rearends for my Fox with gears from anywhere between $150 - $300. Of course, buyer beware when grabbing used parts, you have to know what your looking for.
That will hold you over till a master plan is made, and a large bank account won't hurt either lol.
Also, dig around on this forum for older threads on modding your 94'. There's a ton of info on every mod available. What works and what doesn't help much. Use the "Search" and you'll be reading for days. Good luck
That will hold you over till a master plan is made, and a large bank account won't hurt either lol.
Also, dig around on this forum for older threads on modding your 94'. There's a ton of info on every mod available. What works and what doesn't help much. Use the "Search" and you'll be reading for days. Good luck
Last edited by 88 orangepeel notch; 12-02-2015 at 07:58 AM.
Thread
Thread Starter
Forum
Replies
Last Post
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
2
10-11-2015 08:59 PM
MustangForums Editor
Mustang News, Concepts, Rumors & Discussion
1
10-08-2015 09:55 AM