Best exhaust for the 5.0
#31
Based on this discussion and talk on the other mustang forums, I went with the GT500 FRPP axle backs...
I had no trouble swapping exhausts on my last Mustang (2009 gt) but I can't seem to get clearance to get the new mufflers onto this car! I have been fighting with them for hours....Do you have to remove that pan hard brace or something? I'd rather not if Its not absolutely necessary.
Any tips would be appreciated!!
Edit: got it! Make no mistake- this axle back is much louder thank stock...after
some idling and gentle revving, i can verify that it sounds mean..not as raw or raspy as the Loudmouth kit I had on my 09...but a more well rounded and better sounding note.
I had no trouble swapping exhausts on my last Mustang (2009 gt) but I can't seem to get clearance to get the new mufflers onto this car! I have been fighting with them for hours....Do you have to remove that pan hard brace or something? I'd rather not if Its not absolutely necessary.
Any tips would be appreciated!!
Edit: got it! Make no mistake- this axle back is much louder thank stock...after
some idling and gentle revving, i can verify that it sounds mean..not as raw or raspy as the Loudmouth kit I had on my 09...but a more well rounded and better sounding note.
Last edited by MRGTX; 03-06-2011 at 02:31 PM.
#35
I first went with the Flowmaster Hushpower... but they are a little too much for me.
You live, you learn... just bought some GT500s
So anyone looking for a just like new (like under 400 miles) pair of Hushpowers Axle Backs for their 2011-12... please reach out.
(I need 50 darn posts to get into the classifieds... so working it...)
You live, you learn... just bought some GT500s
So anyone looking for a just like new (like under 400 miles) pair of Hushpowers Axle Backs for their 2011-12... please reach out.
(I need 50 darn posts to get into the classifieds... so working it...)
#37
I bought a Borla S-type catback used for $700. It is by far the best sounding exhaust for the 2011-2013 5.0 The gt500 also sound nice. I thought about buying gt500 mufflers and then getting the resonators removed and then getting an x-pipe installed to simulate the loudness and the smoothness of the borla s-type. People just dont understand that you cannot make the new 5.0 loud without being raspy unless you have the right mufflers AND an x-pipe (preferably catted)
BELOW IS MY HOMEMADE VID OF MY BORLA S-TYPE
BELOW IS MY HOMEMADE VID OF MY BORLA S-TYPE
#38
Pure muscle car sound....Stainless Works Side Burner Exhaust
http://youtu.be/YTI6qi2DDoU
NEW SideBurner Exhaust
SideBurners Modular Side-Exhaust for 2011+ Ford Mustang 5.0. Designed for a direct-fit, our stealthy, 304 stainless steel, mandrel-bent, side-exhaust system enhances the sound of your muscle car. SideBurners side-exhaust bolts to the factory exhaust, and exits on both sides, just in front of the rear tires, amplifying and adding a muscle-car growl to your ride!
Side Burner Spec Sheet (PDF-Link)
EXTERIOR SOUND LEVELS FROM 10 FEET:
Stock System: 61db @ idle / 63db @ 3500rpm
SideBurners Modular Side-Exhaust: 78db @ idle / 86db @ 3500rpm
STAINLESS WORKS QUALITY AND SOUND:
SideBurners are designed to get the best sound from your vehicle's factory exhaust by amplifying the muscle-car tone, and they are backed by our lifetime guarantee on material and workmanship.
http://youtu.be/YTI6qi2DDoU
NEW SideBurner Exhaust
SideBurners Modular Side-Exhaust for 2011+ Ford Mustang 5.0. Designed for a direct-fit, our stealthy, 304 stainless steel, mandrel-bent, side-exhaust system enhances the sound of your muscle car. SideBurners side-exhaust bolts to the factory exhaust, and exits on both sides, just in front of the rear tires, amplifying and adding a muscle-car growl to your ride!
Side Burner Spec Sheet (PDF-Link)
EXTERIOR SOUND LEVELS FROM 10 FEET:
Stock System: 61db @ idle / 63db @ 3500rpm
SideBurners Modular Side-Exhaust: 78db @ idle / 86db @ 3500rpm
STAINLESS WORKS QUALITY AND SOUND:
SideBurners are designed to get the best sound from your vehicle's factory exhaust by amplifying the muscle-car tone, and they are backed by our lifetime guarantee on material and workmanship.
Thread
Thread Starter
Forum
Replies
Last Post
tj@steeda
Steeda Autosports
0
09-10-2015 08:39 PM