5.0L CAI INSTALLATION WRITEUP
09-28-2013, 11:55 AM
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: WA
Posts: 62
STEP TEN
INSTALL THE FILTER ADAPTER ONTO THE AIRBOX
09-28-2013, 11:58 AM
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: WA
Posts: 62
STEP ELEVEN
TRANSFER THE STOCK MOUNTING GROMMETS FROM THE STOCK AIRBOX TO THE AFTERMARKET AIRBOX
UPPER
LOWER
Last edited by mmarker; 09-28-2013 at 12:00 PM .
09-28-2013, 12:01 PM
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: WA
Posts: 62
STEP TWELVE
INSTALL THE HUMP HOSE ONTO THE FILTER ADAPTER BUT LEAVE THE HOSE CLAMP LOOSE.
09-28-2013, 12:03 PM
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: WA
Posts: 62
STEP THIRTEEN
INSTALL THE AIRBOX INTO THE CAR. ENSURE THE AIR INLET ALIGNS WITH THE FACTORY AIR DUCT ON THE FRONT OF THE BOX AND INSTALL THE FACTORY BOLT AND RESONATOR TUBE STAND.
09-28-2013, 12:05 PM
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: WA
Posts: 62
STEP FOURTEEN
REROUTE THE MAF HARNESS TO ITS NEW LOCATION AND PLUG IT INTO THE MAF. PUSH IN THE RED LOCKING TAB.
09-28-2013, 12:07 PM
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: WA
Posts: 62
STEP FIFTEEN
INSTALL THE INTAKE TUBE AND TIGHTEN DOWN THE (3) HOSE CLAMPS.
09-28-2013, 12:08 PM
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: WA
Posts: 62
STEP SIXTEEN
REINSTALL THE RESONATOR TUBE, CRANK CASE BREATHER LINE, AND BRAKE ASPIRATOR LINE (AT ONLY).
09-28-2013, 12:10 PM
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: WA
Posts: 62
STEP SEVENTEEN
INSTALL THE AIRFILTER ON THE FILTER ADAPTER.
09-28-2013, 12:12 PM
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: WA
Posts: 62
STEP EIGHTEEN
INSTALL THE WEATHERSTRIPPING ONTO THE AIRBOX WITH CONTOURED EDGE AWAY FROM THE FILTER.
09-28-2013, 12:12 PM
1st Gear Member
Thread Starter
Join Date: Jun 2013
Location: WA
Posts: 62
FINALLY
INSTALL THE ENGINE COVER.
