New 347 Stroker High Compression
#1
New 347 Stroker High Compression
Freshly built 342 Stroker
Block:
Hydraulic Roller, Magnafluxed, Media blasted, Hot tanked, Zero Deck, Bore/Hone, Threads chased, Stroker Clearanced, New cam bearings, New Freeze plugs, New galley plugs, etc, etc.
Rotating assembly:
Forged JE/SRP Flat top pistons part# 140689-Std (w/ Total Seal rings)
Scat 9000 Crank (w/ Clevite "P" Bearings)
Scat I-Beam rods (w/ Clevite "P" Bearings)
Compression ratios w/ .038 (Felpro 1011-2) gasket.
58cc = 10.8
61cc = 10.4
64cc = 10.1
68cc = 9.7
Includes: Main Girdle, Teflon Rear Main & 28oz Flywheel balanced to assembly, Turn key, Have all receipts.
$1700 OBO (Plus Shipping) roughly $150 anywhere lower 48, also available for local pickup.
618 420-1717 Ray
Block:
Hydraulic Roller, Magnafluxed, Media blasted, Hot tanked, Zero Deck, Bore/Hone, Threads chased, Stroker Clearanced, New cam bearings, New Freeze plugs, New galley plugs, etc, etc.
Rotating assembly:
Forged JE/SRP Flat top pistons part# 140689-Std (w/ Total Seal rings)
Scat 9000 Crank (w/ Clevite "P" Bearings)
Scat I-Beam rods (w/ Clevite "P" Bearings)
Compression ratios w/ .038 (Felpro 1011-2) gasket.
58cc = 10.8
61cc = 10.4
64cc = 10.1
68cc = 9.7
Includes: Main Girdle, Teflon Rear Main & 28oz Flywheel balanced to assembly, Turn key, Have all receipts.
$1700 OBO (Plus Shipping) roughly $150 anywhere lower 48, also available for local pickup.
618 420-1717 Ray
#4
RE: New 347 Stroker High Compression
Yeah they have so kind ofrule that your not suppose to be able to sell anything on hereunless you have 50 post.I wish I had the extra money cause if I did, I think I'd buy it from you.
#5
#7
RE: New 347 Stroker High Compression
ORIGINAL: 50steveo
that is a good looking short block who built it and were are u located at
steven
that is a good looking short block who built it and were are u located at
steven
Also do Fully forged Dart basedstrokersstarting @only $3800 capable ofwithstanding1000HP.
(618)420-1717 Ray
#8
RE: New 347 Stroker High Compression
#9
RE: New 347 Stroker High Compression
Man, if I didnt just have to pay 2100 to have my rear end bulletproofed. I would buy this. Exactly the kind of bottom end I will be looking for. Bump for a nice block.