[hammeron]

Got a few requests for a write up, so
here it is.


The actual procedure (Hammer's write up):
http://home.comcast.net/~cookpaging/...otrodcams.html



Or if you prefer, you can use FRPP's newly released Hot Rod Cam installation manual:
http://home.comcast.net/~cookpaging/...CamInstall.pdf



What's needed, part numbers included:
http://home.comcast.net/~cookpaging/...tallNotes.html



Tips on using the valve spring compressor:
http://home.comcast.net/~cookpaging/...ompressor.html



For those of you doing other types of cams and are changing the
springs, here is the Ford Service Manual procedure for that:
http://home.comcast.net/~cookpaging/...lveSprings.pdf



Installing Comp phaser limiters? Here are their instructions:
http://home.comcast.net/~cookpaging/...seLimiters.pdf



Installing Livernois phaser lockouts? Here are their instructions:
http://www.livernoismotorsports.com/...structions.pdf





I know a number of people are probably wondering if they
can do this at home, i say yes you can, if you prepare sufficiently.