S197 Classifieds 2005 to 2009 Models

BMR GT 2005-2009 lowering springs w/Tokico HP shocks&FRP upper strut mounts 4 sale!!!

 
Thread Tools
 
Search this Thread
 
Old Sep 7, 2008 | 07:24 PM
  #1  
3.73-11's Avatar
3.73-11
Thread Starter
4th Gear Member
 
Joined: Jun 2008
Posts: 1,155
From: Georgia
Default BMR GT 2005-2009 lowering springs w/Tokico HP shocks&FRP upper strut mounts 4 sale!!!

sold 10/31/2008


Last edited by 3.73-11; Oct 31, 2008 at 07:14 PM. Reason: add info
Old Sep 7, 2008 | 07:47 PM
  #2  
EMichael's Avatar
EMichael
3rd Gear Member
 
Joined: Feb 2008
Posts: 774
From: EB,NJ
Default

why'd you take them off?
Old Sep 7, 2008 | 07:57 PM
  #3  
3.73-11's Avatar
3.73-11
Thread Starter
4th Gear Member
 
Joined: Jun 2008
Posts: 1,155
From: Georgia
Default

added H&R coilovers w/steeda camber plates I scored off ebay c my cardomain page for pics it looks SICK!!!!!!!!!!!!!!!!!!!
Old Sep 7, 2008 | 08:54 PM
  #4  
CommanderCOOL's Avatar
CommanderCOOL
2nd Gear Member
 
Joined: Feb 2008
Posts: 326
From: CA
Default

would you be willing to part out the BMR lowering springs and ship them maybe?
Old Sep 7, 2008 | 09:01 PM
  #5  
3.73-11's Avatar
3.73-11
Thread Starter
4th Gear Member
 
Joined: Jun 2008
Posts: 1,155
From: Georgia
Default

I'm willing to ship not willing to part at this time, trying to sell as a complete package
if your thinking because you have a new stang you don't need the struts your right but seeing as how the struts were designed to be on lowered cars its really the best overall plus since the springs are compressed already you would only have to bolt this complete kit in get an alignment and enjoy what a well lowered stang feels like. These dropped the car a little over a measured inch in front and 1.5" in back on a flat surface measured from the top of the tire to the edge of the wheel well very nice but not to low if you drive on bad roads

Last edited by 3.73-11; Sep 7, 2008 at 09:04 PM. Reason: add info
Old Sep 7, 2008 | 11:33 PM
  #6  
EMichael's Avatar
EMichael
3rd Gear Member
 
Joined: Feb 2008
Posts: 774
From: EB,NJ
Default

where did you buy this kit from? was it a package or did you buy them separately?
Old Sep 8, 2008 | 06:31 AM
  #7  
3.73-11's Avatar
3.73-11
Thread Starter
4th Gear Member
 
Joined: Jun 2008
Posts: 1,155
From: Georgia
Default

I purchased the BMR springs&FRP strut mounts&tokico hp's seperately
Old Sep 8, 2008 | 09:56 PM
  #8  
EMichael's Avatar
EMichael
3rd Gear Member
 
Joined: Feb 2008
Posts: 774
From: EB,NJ
Default

so did you like this setup? how much did it lower the car and improve the handling?
Old Sep 9, 2008 | 02:08 PM
  #9  
3.73-11's Avatar
3.73-11
Thread Starter
4th Gear Member
 
Joined: Jun 2008
Posts: 1,155
From: Georgia
Default

check my other posts it lowered it a little over an inch in front 1.5 or so in back smooth ride over bumps tight under cornering loads or speed, I loved it but not low enough for my tastes
Old Sep 9, 2008 | 02:09 PM
  #10  
EMichael's Avatar
EMichael
3rd Gear Member
 
Joined: Feb 2008
Posts: 774
From: EB,NJ
Default

would i have any trouble scraping my driveway?



All times are GMT -5. The time now is 04:12 PM.